A drum miking system that looks great and delivers extreme isolation
The B-Band UKKO-T single tom drum contact mic system is a remarkable way to capture the true tonality
of your tom consistently, conveniently, and with extreme isolation. This system consists of two important components: the
UKKO DMT preamp, built with high-quality class-A electronics, and the UKKO DST2 Contact mic for superb tone. This system will
work with any size tom, and gives you high-resolution sound, and easy setup!
This mic system was designed to be able
to blend-in visually with the drum kit. That is why B-Band designed the DMT preamp to be chrome colored to match most drum
hardware. It is an extremely lightweight system that does not add any noticeable weight to the drum, or get in the way while
performing like most other drum mic systems. It also very robust and durable, and will endure rigorous touring.
Setting
up and tearing down have never been this easy. The DST2 has an adhesive back that mounts easily and discreetly on the inside
of the drum shell near the batter head. The DST2 lead wire is fed through the drum air hole to the DMT preamp. The preamp
comes with two different mounting options: mounting at the air hole outside of the drum, or a rim clamp mounting. The air
hole mounting option was specially designed to not interrupt the flow of air as the drum breathes. Being as the DMT preamp
is so small in size, there is no need to remove it to put the drum in its case, leave it on and be ready for the next gig
or studio session.
Inside the DMT preamp there are two mini switches that contour the sound for a choice of tone.
One switch controls a -6dB mid cut at 1 kHz and the other is for a +6dB high boost at 5kHz.
B-Band UKKO-T Single Tom Drum Contact Mic Features:
- Extreme isolation of each drum with no bleed from other drums
- Mounts without modification to the drum
- Reduces the need for audio gate effects
- Ultra-quick setups
- Two supplied mounting options for the DMT preamp
- No need to position mics or mic stands; just plug a standard XLR cable into the preamp and play
- Clean looks without the clutter of mic stands
Get that mic stand out of the way, order this mic system today!
B-Band UKKO-T Single Tom Drum Contact Mic Specifications:
- Frequency response: 22Hz — 35kHz (-3dB)
- Phantom power required: 12 — 50-volt
- Output impedance: 200 ohm balanced
- Weight: 52 g. / 74 g. with rim mount
- Dimensions: 76 mm (3.00") / 48mm (1.90") / 40mm (1.60") without rim mount, 102mm (4.00") / 48mm (1.90") / 66mm (2.60")