Go solid state or tube with ample power.

The Markbass Little Mark Tube 800 bass amp head solves the "tube or solid state" dilemma. But it goes a step further by addressing that other perennial concern, "Will I have enough power?" The 800 watts from this powerful bass amp will satisfy any thirst for power, and the two bendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp, or a mix of both. The Markbass head features a mix control for mixing between solid state and tube. The result offers a range of sounds, from the crisp sound in the solid state, to a full, heavy tube sound in the tube state, as well as anything in between. On the front panel there are two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or 1/4". The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter (VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. The Little Mark Tube 800's phantom power switch accompanies the XLR input, for using a microphone on a double bass. Mute control is as simple as a push and a pull on the master volume switch. Additional features include four bands of equalization, line out control, and pre-post EQ switch for the XLR out (on the rear panel). Markbass Little Mark amps and combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country's voltage. Due to homologation issues, the voltage may not be changed. Rack ears not included. The head features a single 6205 miniature tube.

Markbass Little Mark Tube 800 Bass Amp Head Features:

• 1 1/4" input,
• 1 XLR or 1/4" input
• 500W RMS @ 8 ohms, 800W RMS @ 4 ohms
• Gain controls for each input
• Master Volume
• Line Out Level
• Ground Lift switch (rear)
• Pre/Post EQ switch (rear)
• Mute Knob
• Low, Mid, High EQ
• Variable Preshape Filter
• Vintage Loudspeaker Emulator
• Balanced XLR line out

Save BIG when you buy today!

Markbass Little Mark Tube 800 Bass Amp Head Specifications:

• Input 1
  
• Impedance: 500 kOhm,
• Maximum Voltage: 15V
  
  Input 2 (Balanced XLR/1/4" combo)
  
• Impedance: 500 kOhm
• Maximum Voltage: 15Vpp
• Phantom power: 48V
  
  Effect Return
  
• Impedance: 33 kOhm,
• Maximum Voltage: 10Vpp
  
  Controls
  
• Gain 1: -60 dB to +23 dB range; Gain 2: -60 dB to +23 dB range
  
  Equalization
  
• Low center frequency: 40 Hz; level: ±16 dB;
• Low Mid center frequency: 360 Hz, level: ±16 dB; High Mid center frequency: 800 Hz, level: ±16 dB;
• High center frequency: 10 kHz, level: ±16 dB; VPF (Variable Pre-shape Filter) center frequency: 380 Hz (cut); VLE (Vintage Loudspeaker Emulator) frequency range: 250 Hz-20 kHz (cut)
  
  Weight: 6.31lb.
• Dimensions: 2.8"H x 10.87"W x 10.1"D