Tube or solid state? This head's got 'em both.
The Markbass Little Mark tube amp head gives the warmth and richness of a tube preamp, the clean attack
of a solid state preamp, or a mix of both. The bass amp head features a mix control for mixing between a solid state preamp
and tube preamp. The result offers a range of sounds, from the crisp, Markbass sound in the solid state, to a heavy tube sound
in the tube state, and anything in between. On the front panel there are 2 inputs with separate gain controls: one 1/4" jack,
and one combo jack that accepts either an XLR or 1/4". The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter
(VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. A phantom power switch accompanies
the XLR input, for using a microphone on a double bass. Mute control is as simple as a push and a pull on the master volume
switch. The Markbass Little Mark has 4 bands of equalization, line out control, and pre/post EQ switch for the XLR out (on
the rear panel). Rack ears not included. The bass amp head features a single 6205 miniature tube.
Markbass Little Mark Tube Bass Amp Head Features:
- 1 1/4" input
- 1 XLR or 1/4" input
- 300W RMS @ 8 ohms, 500W RMS @ 4 ohms
- Gain controls for each input
- Master Volume
- Line Out Level
- Ground Lift switch (rear)
- Pre/Post EQ switch (rear)
- Mute Knob
- Low, Mid, High EQ
- Variable Preshape Filter
- Vintage Loudspeaker Emulator
- Balanced XLR line out
Whatever you consider your perfect sound, the Little Mark Tube has it. Order today.
Markbass Little Mark Tube Bass Amp Head Specifications:
- Input 1
- Impedance: 500 kOhm,
- Maximum Voltage: 15Vpp
Input 2 (Balanced XLR/1/4" combo)
- Impedance: 500 kOhm
- Maximum Voltage: 15Vpp
- Phantom power: 48V
Effect Return
- Impedance: 33 kOhm,
- Maximum Voltage: 10Vpp
Controls
- Gain 1: -60dB to +23dB range; Gain 2: -60dB to +23dB range
Equalization
- Low center frequency: 40Hz; level: ±16dB;
- Low Mid center frequency: 360Hz, level: ±16dB; High Mid center frequency: 800Hz, level: ±16dB;
- High center frequency: 10kHz, level: ±16dB; VPF (Variable Pre-shape Filter) center frequency: 380Hz (cut); VLE
(Vintage Loudspeaker Emulator) frequency range: 250Hz-20kHz (cut)
Weight: 6.55 lb.
- Dimensions: 2.8"H x 10.87"W x 10.1"D