The ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. Audio Technica ATM450 also features a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The condenser microphone's extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Requires phantom power.

Audio-Technica ATM450 Condenser Instrument Microphone Features:

• Unique side-address stick design maximizes placement options with minimal obstructions
• Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments
• Integral 80 Hz HPF switch and 10 dB pad
• Durable performance for professional applications
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Rugged, all-metal design and construction for years of trouble-free use
• Includes isolation clamp for shock protection, secure mounting and easy positioning
• Fixed-charge back plate permanently polarized condenser

Audio-Technica ATM450 Condenser Instrument Microphone Includes:

• AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch
• Audio-technica S11 case

Save BIG when you buy today!

Audio-Technica ATM450 Condenser Instrument Microphone Specifications:

• Polar pattern: Cardioid
• Frequency response: 40-20,000 Hz
• Low frequency roll-off: 80 Hz, 18 dB/octave
• Open circuit sensitivity: —41 dB (8.9 mV) re 1V at 1 Pa
• Impedance: 200 ohms
• Maximum input sound level: 152 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic range (typical): 127 dB, 1 kHz at Max SPL
• Signal-to-noise ratio: 69 dB, 1 kHz at 1 Pa
• Phantom power requirements: 11-52V DC, 3.5 mA typical
• Switches: Flat, roll-off; 10 dB pad
• Weight: 98 g (3.5 oz)
• Dimensions: 126.9 mm (5.00") long, 21.0 mm (0.83") diameter
• Output connector: Integral 3-pin XLRM-type
• Accessories furnished: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch
• Audio-technica S11 case.