Simplifies and centralizes multiple transmitter setups.

The Audio-Technica MCB4 Antenna Combiner is designed to combine the signals from up to 4 Audio-Technica M3 Wireless In-Ear Monitor stereo transmitters onto a single transmitting antenna. The result: reduced clutter in your rack and increased savings for you.

The Audio-Technica MCB4 antenna combiner's wide-band unit operates over the 440-865MHz range. Though it is designed to complement Audio-Technica M3 Wireless In-Ear Monitor Systems, the M84 active antenna combiner is also suitable for many other in-ear wireless systems (with external BNC antenna connections) operating within the 440 to 865 MHz range. Audio-Technica equips the MCB4 1 antenna combiner with 1 output and 4 isolated transmitter inputs. All RF connectors are BNC-type.

Four jacks on the rear panel (controlled by the M84 unit's power switch) provide 12V DC (center positive) to power as many as 4 wireless microphne transmitters operating on 12 volts at up to 600mA each. Included with the Audio-Technica M84 antenna combiner are 4 DC cables appropriate for use with M3T (or like-powered) wireless transmitters. Audio-Technica built short-circuit protection into the 12-volt transmitter's power supplies. The Audio-Technica MCB4 active antenna combiner's all-metal construction contributes to extreme durability and protection from radio frequency interference.

Audio-Technica MCB4 Active Antenna Combiner Features:

• Broadband UHF operation (440-865MHz range)
• Combines the signals of up to four wireless in-ear monitor transmitters into one antenna
• Centralized power supply with ability to power four individual transmitters
• Maintains clean signals with low distortion
• Includes hardware for front-mounting the antenna for improved performance
• Includes adapters to allow the unit to be mounted into a single rack space

Reduce your rack clutter with the MCB4. Order one today!

Audio-Technica MCB4 Active Antenna Combiner Specifications:

• Description: 4-Way active combiner
• Bandwidth: 440-865MHz
• VSWR: < 1.7:1 (within specified bandwidth)
• System Gain: (per channel) 0dB Typical (within specified bandwidth)
• Impedance: 50 ohms, typical (within specified bandwidth)
• Termination: Type BNC Female (5 total)
• Maximum RF Input Power: +20dBm or 100mW
• Third Order Intercept Point: Greater than 25dBm
• Weight: 1.0kg (2.2lb.)
• Dimensions for base unit only (WxDxH): 210mm (8.27") x 176mm (6.93") x 46mm (1.80") (one rack space)
• Power Supply:
• Desktop Switching Power Supply
• Rated at 5A @ 12VDC or 60W
• Input Voltage 100-240VAC via detachable IEC 320/C14 cable
• Output is provided on an overmolded 3-pin Molex style termination
• Accessories:
• IEC 320/C14 power cable (for power supply); 5 - 22" RF (BNC to BNC) cables; 4 - DC power cables;
• Rack kit for front-mounting antennas and adaptation to a 19" rack
• Transmitter power (optional): 600mA @ 12VDC - 4 outputs from an authorized