|
|
|
|
|
Perfect for speech, theater, orchestra, and choir sound reinforcement and recording.
The U853PMW cardioid condenser hanging microphone comes equipped with a wall/ceiling plate power module
for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone features UniGuard innovations
that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid,
hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80Hz low-cut UniSteep filter reduces pickup of
low-frequency ambient noise.
Audio-Technica U853PMW Cardioid Condenser Hanging Microphone Features:
- Designed for suspension over choirs, instrumental groups, and theater stages
- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90 degrees to 360 degrees
- Low-profile design with low-reflectance finish for minimum visibility
- White finish
- 25' cable
- Operates on battery or phantom power
An overhead mic that makes your sound the star. Order today.
Audio-Technica U853PMW Cardioid Condenser Hanging Microphone Specifications:
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN cardioid
- FREQUENCY RESPONSE: 30-20,000Hz
- LOW FREQUENCY ROLL-OFF : 80Hz,
- 18dB/octave
- OPEN CIRCUIT SENSITIVITY:—39dB (7.9 mV)
- re 1V at 1 Pa
- IMPEDANCE: 200 ohms
- MAXIMUM INPUT SOUND LEVEL: 128dB SPL,
- 1kHz at 1% T.H.D.
- DYNAMIC RANGE (TYPICAL): 102dB, 1kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 68dB, 1kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 4 mA typical
- SWITCH: Flat, roll-off, 0dB/+10dB gain setting
- WEIGHT (microphone): 0.5 oz (14g)
- WEIGHT (power module) : 3.4 oz (97g)
- DIMENSION (microphone): 1.34" (34mm) long, 0.48" (12.2mm) diameter
- DIMENSION (power module): 2.80" (71.0mm) H x 4.55" (115.5mm) W x 1.42" (36mm D OUTPUT CONNECTOR (power module):
- Screw terminals
- CABLE: 25.0' (7.6m) long (permanently attached to microphone), 0.13" (3.2mm) diameter, 2-conductor, shielded cable with
TA3F-type connector
- ACCESSORIES FURNISHED: AT8153(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8534 wall/ceiling plate power
module; AT8438 5/8"-27 stand adapter
- AUDIO-TECHNICA CASE STYLE: M12
|
|
|
|
|
|
|