A 2-microphone system designed for miking piano.

The Audix SCX25A-PS Piano Microphone System has 2 SCX25A microphones; 2 DFLEX dual-pivot, rim-mounted microphone clips; and 2 CBL-20 20' XLR-XLR microphone cables.

2 SCX25A microphones
The Audix SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shockmounted within an intricate machined brass ring, the Audix SCX25A capsule is completely isolated from the microphone's body and electronics. By successfully minimizing acoustic reflections and diffractions, the Audix SCX25A delivers a pure, open-air sound with exceptional detail and realism.

With a smooth, uniform frequency response from 20Hz–20kHz, the Audix SCX25A is very consistent when responding to on and off-axis signals, exhibiting excellent phase coherence and minimal proximity effect. The Audix SCX25A has a wide cardioid polar pattern which enables sound engineers to blend the sound of the instrument or vocals with room sound. Other features include a 1-inch (25 mm) gold vapor capsule, miniaturized electronics, and an extremely small footprint.

The Audix SCX25A handles sound pressure levels in excess of 135dB and provides up to 20dB of ambient noise rejection. In addition to vocals, the SCX25A is ideally suited to capture acoustic instruments such as piano, guitar, vibes, woodwinds, brass, percussion toys, drum overheads, orchestra and symphony sectionals.

The Audix SCX25A, manufactured to exacting standards and tight tolerances, has a precision-machined brass body, innovative capsule suspension system, steel mesh grill, black e-coat finish, laser-etched model and serial number, and Switchcraft XLR connector.

2 DCLIP microphone clips
These 2 tension-fit, heavy-duty nylon microphone clips keep your SCX25As securely in place for optimal recording. Dual-pivot, rim-mounted.

2 CBL-20 cables
These 2 20' microphone cables have XLR-to-XLR connectors.

Audix SCX25A-PS Piano Microphone System Features:

• SCX25A Microphones:
• Innovative design
• Isolated capsule suspension system
• Low noise electronics
• Extremely small footprint

Order this 2-mic system & get everything you need to get started miking piano.

Audix SCX25A-PS Piano Microphone System Specifications:

• Includes:
• 2 x 2C25A microphones
• 2 x DFLEX microphone clips
• 2 x CBL-20 20' XLR-XLR microphone cables
  
  SCX25A Microphones:
• Transducer Type: Condenser
• Frequency Response: 20Hz–20kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 ohms
• Sensitivity at 1k: 28 mV/Pa
• Equivalent Noise Level: 14 dB (A weighted)
• Signal to Noise Ratio: 80 dB
• Maximum SPL: ≥135 dB
• Dynamic Range: 121 dB
• Power Requirements: 48–52Vs phantom
• Connector: Swithcraft male XLR connector
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing/Finish: Machined Brass / Black E-coat
• Weight: 0.5 lb.
• Length: 5-4/5"