24-bit/96kHz feedback suppression with 40 parametric filters.

The FBQ2496 is an incredibly fast feedback suppressor because it uses a speedy feedback detection algorithm that automatically and intelligently locates up to 20 feedback frequencies per channel. It then sets an extremely narrow notch filter to eliminate them, leaving the remainder of the signal virtually untouched.

The auto mode continuously monitors the mix, resetting programmed filters automatically, while the manual mode allows individual settings of up to 40 fully parametric filters with frequency, bandwidth, and gain adjustment. With its various modes you can master just about any live sound situation, or use the Feedback Destroyer Pro as a creative sound-shaping tool.

Behringer FBQ2496 Feedback Destroyer Pro Feedback Suppressor/Parametric EQ Features:

• Automatically and intelligently locates and destroys up to 20 frequencies per channel
• Ultrafast feedback detection (>0.2 sec) due to proprietary FFT signal analysis
• Ultra-narrow notch-filters (up to 1/60th octave) for very effective feedback suppression, while keeping highest sonic quality
• The Set-and-forget default setting plus Panic button enable immediate and super-easy Feedback Destroyer performance
• Auto mode continuously monitors the mix, resetting programmed filters automatically
• Single-shot mode automatically detects and destroys feedback and locks the filter until you reset it manually
• Manual mode allows individual setting of up to 40 fully parametric filters with frequency, bandwidth and gain adjustment
• Ultra-high resolution 24—bit/96kHz A/D and D/A converter powered by a 32-bit DSP for ultimate audio performance
• Open MIDI architecture for future software updates and flexible communication with digital equipment
• Balanced inputs and servo-balanced outputs with gold-plated XLR and 1⁄4" TRS connectors
• Internal switch-mode power supply for flexibility (100-240V), good transient response, plus low power consumption for energy savings
• High-quality components and rugged construction
• Conceived and designed by BEHRINGER Germany

Get rid of that feedback while leaving the rest of your signal virtually untouched, order today!

Behringer FBQ2496 Feedback Destroyer Pro Feedback Suppressor/Parametric EQ Specifications:

• Audio Inputs
• Connections: XLR and 1 / 4" TRS stereo connector
• Type: electronically balanced input
• Input Impedance: approx. 20 kOhms balanced
• Nominal input level: -10 dBV / +4 dBu (adjustable)
• Max. input signal level: +20 dBu at +4 dBu nominal level, +6 dBV at -10 dBV level typically -40 dB
• Audio outputs
• Connections: XLR and 1 / 4" TRS stereo connector
• Type: balanced
• Output impedance: approx. 200 Ohms balanced
• Max. output level: +20 dBu at +4 dBu nominal level, +6 dBV at -10 dBV nominal level
• Bypass:
• Type: Relay, hard bypass in case of power outage
• System information
• Frequency response: <10 Hz to 44 kHz
• Dynamic range: 107 dB
• THD: 0.007% typically @ +4 dBu, 1 kHz, amplification 1
• Crosstalk: <-100 dB @ 1 kHz
• MIDI interface
• Type: 5-pole DIN connections IN / OUT / THRU
• Digital processing
• Converter: 24 Bit / 96 kHz
• Sample Rate: 96 kHz
• Parametric EQ (PEQ)
• Type: max. 20 independent, fully parametric filters per channel
• Frequency range: 20 Hz to 20 kHz
• Bandwidth: 1 / 60th to 10 octaves
• Possible value range: +15 to -36 dB
• Feedback Destroyer (FBQ)
• Type: digital signal analysis for feedback recognition purposes
• Filter: max. 20 digital notch filter per channel
• Frequency range: 20 Hz to 20 kHz
• Bandwidth: 1 / 60th octave
• Possible value range: 0 to -36 dB
• Display
• Type: 3-digit numeric LED display
• Power supply
• Mains voltage: 100 - 240 V, 50 - 60 Hz
• Power consumption: approx. 10 W
• Fuse: T1AH 250 V
• Mains connector: Standard receptacle
• Dimensions / Weight
• Dimensions (H x W x D: approx. 44.5 mm x 482.6 mm x 190.5 mm
• Weight: approx. 4.2 lb. (1.9kg)