|
|
|
|
|
A ready-to-rock complete PA system for bands that need a big onstage sound.
The Behringer PMP4000/B1520-PRO Mains and Monitor PA package combines Behringer's EUROPOWER PMP4000
16-channel Powered Mixer with 4 Behringer EUROLIVE B1520-PRO speakers. But that's not all. Completing the PA system are 4
Behringer XM8500 microphones, 4 Gear One XLR mic cables (20 ft. each), 4 Gear One Speakon Speaker cables (20 ft. each), and
2 Musician's Gear Standard Speaker Stands. This PA package gives you a great collection of live sound equipment so you're
fully prepared for life on the road.
Behringer EUROPOWER PMP4000 16-channel Powered Mixer
This PA system comes with the Behringer EUROPOWER PMP4000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) that produces
even more power than its predecessing mixing consoles while maintaining famously low weight and high efficiency. The Behringer
EUROPOWER PMP4000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and
heat. The 16-channel Behringer mixer offers 8 built-in XENYX mic preamps, 24-bit FX processor with 100 presets, and FBQ Feedback
Detection.
What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per
second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly
reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and
that makes them lighter. This no-compromise design means the Behringer EUROPOWER PMP4000 mixer will deliver full power with
incredible fidelity all night long, without the need for lengthy rest cycles.
When used in conjunction with switching-mode
power supplies, which don't require huge and heavy transformers, Behringer's Class-D amplifiers provide tremendous dynamic
punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.
Massive
Mono or Stunning Stereo
The Behringer EUROPOWER PMP4000 audio mixer gives you the choice of 2 x 800-watt stereo, 2 x 800-watt dual mono mode (giving
you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the
second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech,
or a synth-rock band with mind-boggling stereo patches, the Behringer EUROPOWER mixer can accommodate. This sonic versatility
also makes this live mixing console an excellent choice for churches, where vocals and stereo recordings often share face
time.
Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever
you do. Built-in, boutique-caliber mic preamps with switchable +48V phantom power make it possible to use either dynamic or
condenser mics with the EUROPOWER PMP4000 mixer. It gives you 8 mic inputs.
Built-in Digital Effects Processor
The EUROPOWER PMP4000 comes equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as
delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double
duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have
treasured outboard gear you've grown attached to, the Behringer mixer can integrate them into the mix while leaving out the
built-in FX processor.
Changing the Channels
The EUROPOWER PMP4000 mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for
mics, guitars, and other mono instruments. Stereo channels 9-16 are designed to work in pairs as stereo channels, or independently
for more mono instruments. All mono channels have 3-band EQ, switchable Low-cut filter for eliminating infrasonics, and Clip
LEDs to indicate when the input signal is too hot.
The Behringer mixer's FBQ Feedback Detection system automatically
shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ
pinpoint show you which frequencies to adjust for optimized sound, without the feedback.
The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The Voice Canceler switch
eliminates the vocals from prerecorded music for instant karaoke applications.
CD/Tape Out RCA outputs send line-level
signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes,
including connecting more power amps. Connect monitor power amps or active monitor speakers to the Mon Sound output. Powered
outputs on this mixer are available in professional Speakon-compatible format.
Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP4000 mixer is one of the most efficient,
affordable mixers for the job, and is even suitable for use as pure analog mixer or as a pure power amplifiers. With new technological
advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public
performances.
Behringer EUROLIVE B1520-PRO Speakers
The Behringer Eurolive B1520-PRO 2-Way loudspeakers from the Professional Series each feature a beefy 15" long-excursion woofer
and 1-3/4" titanium driver capable of handling 400W/800W program/peak power handling while delivering robust sound pressure
levels. A wide 50Hz-18kHz frequency range ensures solid bottom end and brilliant, natural highs. It also features 50°x
50° dispersion, a crossover frequency of 2.5kHz, a rugged construction with steel grille, and Speakon connectors. The
Behringer speakers' rotatable design means it works as either a main or floor monitor, while a 35mm socket allows it to be
pole mounted.
Behringer XM8500 Microphone
The Behringer XM8500 microphone uses a cardioid pattern to focus on your voice while the integrated shock mount system reduces
handling noise to almost nothing. Balanced low-impedance output connects to any console or microphone preamp. 50Hz to 15kHz
frequency response for crystal-clear, highly detailed vocals. 2-stage pop filter minimizes breath and pop noises. The mic
comes with a rugged hard case with mic clip and stand adapter.
Musician's Gear Standard Speaker Stand
Standard audio speaker stand adjusts from 42" to 71" in height and accepts 1-3/8" diameter sockets. Holds 110 lb. Aluminum
construction reduces stand weight for easy transport. Molded plastic leg housing with ergonomic knob is extremely durable.
Gear One XLR Microphone Cable
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use.
Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating
hums, buzzing, and crackles.
Gear One Speakon Speaker Cable
This is a 20-foot, 16-gauge speaker cable with Speakon to Speakon connection.
Behringer PMP4000/B1520 PRO Mains & Monitors PA Package Features:
- Behringer EUROPOWER PMP4000 16-channel powered mixer
- Ultra-compact rackmountable 2 x 800W stereo powered mixer (1600W bridged mode)
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance, and super-lightweight
- Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead
weight
- 16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
- Studio-grade, 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and
various multi-effects
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
- 8 high-quality XENYX Mic Preamps with switchable +48V phantom power for condenser microphones
- Effective, extremely musical 3-band EQ, switchable Pad, and Clip LEDs on all mono channels
- Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
- Voice Canceler function removes singer's voice from recordings for karaoke applications
- Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
- Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series,
etc.
- Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
- Adjustable stereo Aux input for connecting external signal sources
- Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
- Rackmount brackets included
- High-quality components and exceptionally rugged construction ensure long- life
- Conceived and designed by BEHRINGER Germany
Behringer XM8500 microphone
- 50Hz to 15kHz frequency response
- Cardioid characteristic with excellent feedback suppression
- Shock mount system reduces handling noise
- 2-stage pop filter minimizes breath and pop noises
- Sturdy, reliable metal construction and electromagnetic shielding
- Delivered in a rugged hard case with microphone clip and stand adapter
Gear One XLR Microphone Cable
- Sturdy construction for enhanced signal and performance
- Flexible mic cable design eliminates kinks and twists for a tangle-free performance in-studio and onstage
Musician's
Gear Standard Speaker Stand
- 42" to 71" height
- 110 lb. capacity
- Lightweight rugged, aluminum
- Portable
- Use with 1-3/8 sockets
This PA system gives you a ready-to-go live sound setup. Own it today!
Behringer PMP4000/B1520 PRO Mains & Monitors PA Package Specifications:
- Behringer EUROPOWER PMP4000 16-channel powered mixer
- Microphone Inputs
- Type: XLR, electronically balanced input circuit
- Mic E.I.N. (20Hz-20kHz): @ 0Ω source resistance: -134dB / 136dB A-weighted, @ 50Ω source resistance: -131.5dB
/ 134dB A-weighted, @ 150Ω source resistance: -129dB / 155dB A-weighted
- Frequency response: < 10Hz-200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
- Gain: +10dB, +60dB
- Max. input level: +12dBu @ +10dB gain
- Impedance approx.: 2.6kΩ balanced / 1.3kΩ unbalanced
- Signal-to-noise ratio: 109dB / 112dB A-weighted (0dBu In @ +10dB gain)
- Noise (THD + N): 0.002% / 0.00018% A-weighted
Mono Line Inputs
- Type: 1/4" TS connectors, balanced
- Impedance: approx. 20kΩ
- Max. input level: +21dBu
Stereo Line Inputs
- Type: 1/4" TRS connectors, unbalanced
- Impedance: > 3.6kΩ
- Max. input level: +22dBu
Equalizer
- Low: 80Hz / ±15dB
- Mid: 2.5kHz / ±15dB
- High: 12kHz / ±15dB
2-Track Input
- Type: RCA
- Impedance approx.: 3.6kΩ
Preamp Outputs
- MAIN:
- Type: 1/4" TS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. output level: +21dBu
Monitor
- Type: 1/4" TS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. output level: +21dBu
Stereo Outputs
- Type: 1/4" TRS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. input level: +21dBu
- Type: RCA
- Impedance: approx. 1kΩ
- Max. input level: +21dBu
Loudspeaker Outputs
- Type: Professional loxking connector
- Load impedance:
- MAIN L/R: 4 - 8Ω
- MONITOR/MAIN MONO: 4 - 8Ω
- MAIN MONO/MAIN MONO: 4 - 8Ω
- BRIDGE: 8 - 16Ω
DSP
- Converter: 24-bit Delta-Sigma, 64/128-times oversampling
- Dynamic:s D/A 90dB
- Sampling rate: 46.875kHz
- Delay Time: max. 5 secs
- Signal run time (Line In > Line Out): approx. 1.5ms
Display
- Type: 2-digit, 7-segment LED
Output Power
- RMS @ 1% THD, both channels driven:
- 8Ω per channel: 300W
- 4Ω per channel: 600W
- RMS @ 1% THD, bridged mode: 8Ω 1200W
- Peak Power, both channels driven:
- 8Ω per channel: 400W
- 4Ω per channel: 800W
- Peak Power, bridged mode: 8Ω 1600W
Power Supply
- Mains voltage
- USA/Canada: 120V~, 60Hz
- Fuse 100: - 120V~ T 10 A H 250V
- Fuse 220: - 240V~ T 6.3 A H 250V
Power Consumption
- Power consumption: 1050W
- Mains connector: IEC standard receptacle
Dimensions/Weight
- Dimensions (WxHxD): 18-3/4" x 4-7/8" x 18-1/8", 476mm x 122mm x 460mm
- Weight: 22.9 lb./10.4 kg
EUROLIVE B1520-PRO speakers
- Powerful long-excursion 15" driver
- Rotatable, asymmetrical 1-3/4" HF titanium diaphragm compression driver
- Wide 50°x 50° dispersion
- 400W/800W program/peak power handling @ 8 ohms
- SPL: 96dB (1W @ 1m) full space
- Frequency range: 50Hz-18kHz (-10dB)
- Crossover frequency: 2.5kHz
- Rotatable design for mains or floor monitor use
- 35mm socket for pole mounting
- Neutrik Speakon connectors
- 15-3/5"W x 25-1/8"H x 16"D
- 52 lb.
|
|
|
|
|
|
|