|
|
|
|
|
A simple, affordable live sound setup with powerful PAs, mixer, mics, and more.
The Behringer PMP4000 / B215XL Powered Mixer PA package inexpensively assembles the equipment you need
to monitor, capture, mix, and project your live performances. All the live sound accessories you need are included in the
setup.
The package includes:
•1 BEHRINGER EUROPOWER PMP4000 Powered Mixer
•2 B215XL 15" 1000W Passive Titanium PA Speakers
•4 BEHRINGER XM8500 Microphones
•2 1/4" to 1/4" Speaker Cables (25' each)
•4 XLR Microphone Cables (20' each)
•2 Speakon to 1/4" Speaker Cables (25' each)
•2 Standard Speaker Stands
BEHRINGER EUROPOWER PMP4000 Powered Mixer
The BEHRINGER EUROPOWER PMP4000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than its predecessors
while maintaining famously low weight and high efficiency. The EUROPOWER PMP4000 mixer employs Class-D technology including
a switch-mode power supply, significantly reducing weight and heat. The 16-channel BEHRINGER PMP4000 offers 8 built-in XENYX
mic preamps, 24-bit FX processor with 100 presets, and FBQ Feedback Detection.
What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per
second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly
reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and
that makes them lighter. This no-compromise design means the EUROPOWER PMP4000 mixer will deliver full power with incredible
fidelity all night long, without the need for lengthy rest cycles.
When used in conjunction with switching-mode power
supplies, which don't require huge and heavy transformers, BEHRINGER's Class-D amplifiers provide tremendous dynamic punch
and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.
Massive
Mono or Stunning Stereo
EUROPOWER PMP4000 gives you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the
main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or
1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with
mind-boggling stereo patches, the EUROPOWER PMP4000 mixers can accommodate. This sonic versatility also makes it an excellent
choice for churches, where vocals and stereo recordings often share face time.
Classic Control, State-of-the-Art
Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever
you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic
or condenser mics with the EUROPOWER PMP4000. It gives you 8 mic inputs.
Built-in Digital Effects Processor
The EUROPOWER PMP4000 comes equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as
delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double
duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have
treasured outboard gear you've grown attached to, the EUROPOWER PMP4000 can integrate them into the mix while leaving out
the built-in FX processor.
Changing the Channels
The EUROPOWER PMP4000 mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for
mics, guitars, and other mono instruments. Stereo channels 9-16 are designed to work in pairs as stereo channels, or independently
for more mono instruments. All mono channels have 3-band EQ, switchable Low cut filter for eliminating infrasonics, and Clip
LEDs to indicate when the input signal is too hot.
The FBQ Feedback Detection system automatically shows you which
frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show
you which frequencies to adjust for optimized sound, without the feedback.
The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch
eliminates the vocals from pre-recorded music for instant karaoke applications.
CD/TAPE OUT RCA outputs send line-level
signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes,
including connecting more power amps. Connect monitor power amps or active monitor speakers to the MON SOUND output. Powered
outputs on this mixer are available in professional Speakon-compatible format.
Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP4000 mixer is one of the most efficient,
affordable mixers for the job, and is even suitable for use as pure analog mixer or as a pure power amplifiers. With new technological
advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public
performances.
BEHRINGER B215XL 15" Passive PA Speaker
The BEHRINGER B215XL is a 2-way passive PA speaker that boasts a whopping 1,000W power handling (peak), a 15" woofer, and
a state-of-the-art 1-3/4" titanium-diaphragm compression driver. Ideal for live and playback applications, the BEHRINGER
B215XL speaker delivers deep, booming bass and acoustic power in an ultra-compact, lightweight package. This super-portable
PA system provides excellent sound even at extreme levels, and the 1-3/4" compression driver allows for exceptional high-frequency
reproduction.
BEHRINGER XM8500 Mic
The BEHRINGER XM8500 Microphone uses a cardioid pattern to focus on your voice while the integrated shock mount system reduces
handling noise to almost nothing. It has a balanced low-impedance output for connecting to any console or microphone preamp.
The XM800's 50Hz to 15kHz frequency response provides you with crystal-clear, highly detailed vocals, while a 2-stage pop
filter minimizes breath and pop noises. It also comes with a rugged hard case with mic clip and stand adapter.
Gear
One XLR Microphone cables
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use.
Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating
hums, buzzing, and crackles.
Gear One 1/4" Speaker Cables
These tough, high-quality 25-foot speaker cables have 1/4"-to-1/4" metal connectors.
Gear One Speakon to 1/4"
Speaker Cables
This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other.
Musician's
Gear Standard Speaker Stands
These Muisician's Gear Standard Speaker audio speaker stands adjust from 42" to 71" in height and accept 1-3/8" diameter sockets.
Each can hold up to 110lb. Their aluminum construction reduce stand weight for easy transport, and their molded plastic leg
housing with ergonomic knobs are extremely durable.
Behringer PMP4000 / B215XL Powered Mixer Mains & Mics Package Features:
- BEHRINGER EUROPOWER PMP4000 Powered Mixer
- Ultra-compact rackmountable 2 x 800W stereo powered mixer (1600W bridged mode)
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance, and super-lightweight
- Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead
weight
- 16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
- Studio-grade, 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and
various multi-effects
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
- 8 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones
- Effective, extremely musical 3-band EQ, switchable Pad, and Clip LEDs on all mono channels
- Stereo 7-band graphic EQs allows precise frequency correction of monitor and main outputs
- Voice Canceller function removes singer's voice from recordings for karaoke applications
- Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
- Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series,
etc.
- Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
- Adjustable stereo Aux input for connecting external signal sources
- Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
- Rack mount brackets included
- High-quality components and exceptionally rugged construction ensure long- life
- Conceived and designed in Germany
BEHRINGER B215XL 15" Passive PA Speaker
- High-power, 2-way PA sound reinforcement speaker system for live and playback applications (250W continuous/1000W peak
power)
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1-3/4" titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning: Standmounts with 25mm pole socket or tilts on its
side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1/4" jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
BEHRINGER XM8500 mic
- 50Hz to 15kHz frequency response
- Cardioid characteristic with excellent feedback suppression
- Shock mount system reduces handling noise
- Two-stage pop filter minimizes breath and pop noises
- Sturdy, reliable metal construction and electromagnetic shielding
- Delivered in a rugged hard case with microphone clip and stand adapter
Gear One XLR Microphone cable
- Sturdy construction for enhanced signal and performance
- Flexible mic cable design eliminates kinks and twists for a tangle-free performance in-studio and onstage
- 20 feet each
Musician's Gear Standard Speaker Stand
- 42" to 71" height
- 110-lb. capacity
- Lightweight rugged, aluminum
- Portable
- Use with 1-3/8 sockets
Get kick-ass sound at a kick-ass price. Order today!
Behringer PMP4000 / B215XL Powered Mixer Mains & Mics Package Specifications:
- BEHRINGER EUROPOWER PMP4000 Powered Mixer Microphone Inputs
- Type: XLR, electronically balanced input circuit
- Mic E.I.N. (20Hz - 20kHz): @ 0Ω source resistance: -134dB / 136dB A-weighted, @ 50Ω source resistance: -131.5dB
/ 134dB A-weighted, @ 150Ω source resistance: -129dB / 155dB A-weighted
- Frequency response: < 10Hz - 200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
- Gain: +10dB, +60dB
- Max. input level: +12dBu @ +10dB gain
- Impedance approx.: 2.6kΩ balanced / 1.3kΩ unbalanced
- Signal-to-noise ratio: 109dB / 112dB A-weighted (0dBu In @ +10dB gain)
- Noise (THD + N): 0.002% / 0.00018% A-weighted
Mono Line Inputs
- Type: 1/4" TS connectors, balanced
- Impedance: approx. 20kΩ
- Max. input level: +21dBu
Stereo Line Inputs
- Type: 1/4" TRS connectors, unbalanced
- Impedance: > 3.6kΩ
- Max. input level: +22dBu
Equalizer
- Low: 80Hz / ±15dB
- Mid: 2.5kHz / ±15dB
- High: 12kHz / ±15dB
2-Track Input
- Type: RCA
- Impedance approx.: 3.6kΩ
Preamp Outputs
- MAIN:
- Type: 1/4" TS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. output level: +21dBu
Monitor
- Type: 1/4" TS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. output level: +21dBu
Stereo Outputs
- Type: 1/4" TRS connectors, unbalanced
- Impedance: approx. 150Ω, unbalanced
- Max. input level: +21dBu
- Type: RCA
- Impedance: approx. 1kΩ
- Max. input level: +21dBu
Loudspeaker Outputs
- Type: Professional loxking connector
- Load impedance:
- MAIN L/R: 4 - 8Ω
- MONITOR/MAIN MONO: 4 - 8Ω
- MAIN MONO/MAIN MONO: 4 - 8Ω
- BRIDGE: 8 - 16Ω
DSP
- Converter: 24-bit Delta-Sigma, 64/128-times oversampling
- Dynamic:s D/A 90dB
- Sampling rate: 46.875kHz
- Delay Time: max. 5 secs
- Signal run time (Line In > Line Out): approx. 1.5ms
Display
- Type: 2-digit, 7-segment LED
Output Power
- RMS @ 1% THD, both channels driven:
- 8Ω per channel: 300W
- 4Ω per channel: 600W
- RMS @ 1% THD, bridged mode: 8Ω 1200W
- Peak Power, both channels driven:
- 8Ω per channel: 400W
- 4Ω per channel: 800W
- Peak Power, bridged mode: 8Ω 1600W
Power Supply
- Mains voltage
- USA/Canada: 120V~, 60Hz
- Fuse 100: - 120 V~ T 10 A H 250V
- Fuse 220: - 240 V~ T 6.3 A H 250V
Power Consumption
- Power consumption: 1050W
- Mains connector: IEC standard receptacle
Dimensions/Weight
- Dimensions (HxWxD): 4 7/8" x 18 3/4" x18 1/8", 122mm x 476mm x 460mm
- Weight: 10.4kg / 22.9lb.
BEHRINGER B215XL 15" Passive PA Speaker
- High Performance Woofer: 15" (381mm)
- Tweeter Compression Driver: 1.75" (44mm)
- Frequency Range: 55Hz to 20kHz
- Power Rating: 1000W Peak Power; 250W Continuous (IEC 60268-5)
- Impedance: 8Ω
- Sensitivity: 96dB (Full Space)
- Dispersion: 70° x 40°
- Crossover Frequency: 2.0kHz
- Dimensions (H x W x D): 27-1/3" x 17-1/3" x 13-1/16" (695 x 440 x 335mm)
- Weight: 38.7lb. (17.6kg)
|
|
|
|
|
|
|