This affordable mix of live sound gear features a 20-channel mixer, 4 12" PAs, 2 mics, and more.

The Behringer PMP6000 / B212XL Mains and Monitors PA Package is an inexpensive collection of Behringer technology to monitor, capture, mix, and project your live performances. The package includes all the accessories you need to complete your live sound setup.

The package includes:
•1 BEHRINGER EUROPOWER PMP6000 Powered Mixer
•4 B212XL 12" 800W Passive Titanium PA Speakers
•2 BEHRINGER XM8500 Microphones
•2 1/4" to 1/4" Speaker Cables (25' each)
•2 XLR Microphone Cables (20' each)
•2 Speakon to 1/4" Speaker Cables (25' each)
•2 Standard Speaker Stands

BERHRINGER EUROPOWER PMP6000 Powered Mixer
The BEHRINGER EUROPOWER PMP6000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than previous mixers while maintaining famously low weight and high efficiency. The BEHRINGER EUROPOWER PMP6000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 20-channel BEHRINGER PMP6000 features 12 built-in XENYX mic preamps, 2 studio-grade 24-bit FX processors with 100 presets, and FBQ Feedback Detection.

What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the EUROPOWER PMP6000 mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.

When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, BEHRINGER's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.

Massive Mono or Stunning Stereo
EUROPOWER PMP6000 gives you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP6000 mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.

Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP6000. It gives you 12 mic inputs.

Built-in Digital Effects Processor
The EUROPOWER PMP6000 comes equipped with dual 24-bit FX processors, giving you 100 mind-blowing digital effect presets such as delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have treasured outboard gear you've grown attached to, the EUROPOWER PMP6000 can integrate them into the mix while leaving out the built-in FX processor.

Changing the Channels
The EUROPOWER PMP6000 mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for mics, guitars, and other mono instruments. Stereo channels 9-16 are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable low-cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.

The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.

The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch eliminates the vocals from pre-recorded music for instant karaoke applications.

CD/TAPE OUT RCA outputs send line-level signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the MON SOUND output. Powered outputs on this mixer are available in professional Speakon-compatible format.

Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP6000 mixer is one of the most efficient, affordable mixers for the job, and is even suitable for use as pure analog mixer or as a pure power amplifiers. With new technological advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public performances.

B212XL 12" 800W Passive Titanium PA Speakers
The BEHRINGER B212XL is a 2-way PA speaker system that boasts a 12" woofer and 1-3/4" titanium compression driver, making it ideal for live and playback applications. With deep, booming bass and acoustic power, this ultra-compact, lightweight PA system delivers excellent sound even at extreme levels. The 1-3/4" titanium compression driver delivers exceptional high-frequency reproduction, and its ultra-wide dispersion horn guarantees that your sound will be heard.

With deep, solid bass and plenty of power handling capability, the ultra-compact, lightweight B212XL system from BEHRINGER handles 800W (peak) and delivers excellent sound, even at extreme levels.

BEHRINGER XM8500 Mic
The BEHRINGER XM8500 Microphone uses a cardioid pattern to focus on your voice while the integrated shock mount system reduces handling noise to almost nothing. It has a balanced low-impedance output for connecting to any console or microphone preamp. The XM800's 50Hz to 15kHz frequency response provides you with crystal-clear, highly detailed vocals, while a 2-stage pop filter minimizes breath and pop noises. It also comes with a rugged hard case with mic clip and stand adapter.

Gear One XLR Microphone cables
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use. Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing, and crackles.

Gear One 1/4" Speaker Cables
These tough, high-quality 25-foot speaker cables have 1/4"-to-1/4" metal connectors.

Gear One Speakon to 1/4" Speaker Cables
This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other.

Musician's Gear Standard Speaker Stands
These Muisician's Gear Standard Speaker audio speaker stands adjust from 42" to 71" in height and accept 1-3/8" diameter sockets. Each can hold up to 110lb. Their aluminum construction reduce stand weight for easy transport, and their molded plastic leg housing with ergonomic knobs are extremely durable.

Behringer PMP6000 / B212XL Mains Monitors & Mics Package Features:

• Behringer EUROPOWER PMP6000
• Ultra-compact rackmountable 2 x 800W stereo powered mixer (1600W bridged mode)
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance, and super-lightweight
• Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight
• 20-channel mixer section features 12 mono and 4 stereo channels plus separate CD/Tape input/output
• 2 studio-grade, 24-bit stereo FX processors with 100 presets including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
• 12 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones
• Effective, extremely musical 3-band EQ, switchable Pad, and Clip LEDs on all mono channels
• Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
• Voice Canceller function removes singer's voice from recordings for karaoke applications
• Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
• Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
• Standby switch mutes all input channels during breaks while background music is provided via CD/Tape input
• Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
• Adjustable stereo 2-Track input for connecting external line sources
• Multi-functional stereo Preamp outputs for added flexibility
• Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
• High-quality components and exceptionally rugged construction ensure long- life
• Conceived and designed by BEHRINGER Germany
  
  B212XL 12" 800W Passive Titanium PA Speakers
• High-power, 2-way PA sound reinforcement speaker system for live and playback applications (200W continuous/800W peak power)
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1-3/4" titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn
• Overload-protection circuitry ensures optimal HF driver protection
• Versatile trapezoidal enclosure design allows different positioning: Stand-mounts with 25mm pole socket or tilts on its side for use as a floor monitor
• Ergonomically shaped handles for easy carrying and setup
• 2 professional speaker connectors plus 1/4" jack connectors
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany
  
  BEHRINGER XM8500 mic
• 50Hz to 15kHz frequency response
• Cardioid characteristic with excellent feedback suppression
• Shock mount system reduces handling noise
• Two-stage pop filter minimizes breath and pop noises
• Sturdy, reliable metal construction and electromagnetic shielding
• Delivered in a rugged hard case with microphone clip and stand adapter
  
  Gear One XLR Microphone cable
• Sturdy construction for enhanced signal and performance
• Flexible mic cable design eliminates kinks and twists for a tangle-free performance in-studio and onstage
• 20 feet each
  
  Musician's Gear Standard Speaker Stand
• 42" to 71" height
• 110-lb. capacity
• Lightweight rugged, aluminum
• Portable
• Use with 1-3/8 sockets

Save money without penny-pinching on sound quality. Order this PA package today.

Behringer PMP6000 / B212XL Mains Monitors & Mics Package Specifications:

• Behringer EUROPOWER PMP6000
• Microphone Inputs
• Type: XLR, electronically balanced input circuit
• Mic E.I.N. (20Hz - 20kHz): @ 0Ω source resistance: -134dB / 136dB A-weighted, @ 50Ω source resistance: -131.5dB / 134dB A-weighted, @ 150Ω source resistance: -129dB / 155dB A-weighted
• Frequency response: < 10Hz - 200kHz (-1dB), < 10Hz - > 200kHz (-3dB)
• Gain: +10dB, +60dB
• Max. input level: +12dBu @ +10dB gain
• Impedance approx.: 2.6kΩ balanced / 1.3kΩ unbalanced
• Signal-to-noise ratio: 109dB / 112dB A-weighted (0dBu In @ +10dB gain)
• Noise (THD + N): 0.002% / 0.00018% A-weighted
  
  Mono Line Inputs
• Type: 1/4" TS connectors, balanced
• Impedance: approx. 20kΩ
• Max. input level: +21dBu
  
  Stereo Line Inputs
• Type: 1/4" TRS connectors, unbalanced
• Impedance: > 3.6kΩ
• Max. input level: +22dBu
  
  Equalizer
• Low: 80Hz / ±15dB
• Mid: 100Hz-8kHz / ±15dB
• High: 12kHz / ±15dB
  
  2-Track Input
• Type: RCA
• Impedance approx.: 3.6kΩ
  
  Preamp Outputs
• MAIN:
• Type: 1/4" TS connectors, unbalanced
• Impedance: approx. 150Ω, unbalanced
• Max. output level: +21dBu
  
  Monitor
• Type: 1/4" TS connectors, unbalanced
• Impedance: approx. 150Ω, unbalanced
• Max. output level: +21dBu
  
  Stereo Outputs
• Type: 1/4" TRS connectors, unbalanced
• Impedance: approx. 150Ω, unbalanced
• Max. input level: +21dBu
• Type: RCA
• Impedance: approx. 1kΩ
• Max. input level: +21dBu
  
  Loudspeaker Outputs
• Type: Professional loxking connector
• Load impedance:
• MAIN L/R: 4 - 8Ω
• MONITOR/MAIN MONO: 4 - 8Ω
• MAIN MONO/MAIN MONO: 4 - 8Ω
• BRIDGE: 8 - 16Ω
  
  DSP
• Converter: 24-bit Delta-Sigma, 64/128-times oversampling
• Dynamic:s D/A 90dB
• Sampling rate: 46.875kHz
• Delay Time: max. 5 secs
• Signal run time (Line In > Line Out): approx. 1.5ms
  
  Display
• Type: 2 x 2-digit, 7-segment LED
  
  Output Power
• RMS @ 1% THD, both channels driven:
• 8Ω per channel: 300W
• 4Ω per channel: 600W
• RMS @ 1% THD, bridged mode: 8Ω 1200W
• Peak Power, both channels driven:
• 8Ω per channel: 400W
• 4Ω per channel: 800W
• Peak Power, bridged mode: 8Ω 1600W
  
  Power Supply
• Mains voltage
• USA/Canada: 120V~, 60Hz
• Fuse 100: - 120 V~ T 10 A H 250V
• Fuse 220: - 240 V~ T 6.3 A H 250V
  
  Power Consumption
• Power consumption: 1050W
• Mains connector: IEC standard receptacle
  
  Dimensions/Weight
• High Performance Woofer: 12" (305mm)
• Tweeter Compression Driver: 1.75" (44mm)
• Frequency Range: 65Hz to 18kHz
• Power Rating: 800W Peak Power; 200W Continuous (IEC 60268-5)
• Impedance: 8Ω
• Sensitivity: 95dB (Full Space)
• Dispersion: 90° x 60°
• Crossover Frequency: 1.9kHz
• Dimensions (H x W x D): 21-2/3" x 13-5/8" x 10-5/8" (550 x 345 x 270mm)
• Weight: 24lb. (10.9kg)
• Dimensions (HxWxD): 4-7/8" x 23-1/2" x 19-1/2", 122mm x 596mm x 496mm
• Weight: 10.4kg / 22.9lb.
  
  B212XL 12" 800W Passive Titanium PA Speakers