Fill your cab with these classic metal speakers today.

The Metal/Hard Rock 4x12 speaker set features 2 Celestion G12T-75 12" Speakers and 2 Vintage 30 Speakers.

G12T-75 12" Speaker
Built to meet the demands of high gain amplifiers, the G12T-75 speaker combines a huge, tightly controlled low-end and aggressive mid-range with a softened top-end that adds a welcome sweetness to overdrive, distortion, and aggressive upper harmonics.

Vintage 30 Speaker
The Celestion Vintage 30 Speaker recreates the sound of the original Celestion Blue with new cone and new coil assembly for improved performance. It is now rated at 60W capability and handles the extra heat generated by higher power equipment. The Vintage 30 handles massive overdrive tones with ease.

Call or click to order this set of 4 classic guitar loudspeakers today.

Celestion Metal/Hard Rock 4x12 Speaker Set Specifications:

• Celestion Vintage 30 Speaker
• Nominal diameter: 12", 305mm
• Power Rating: 60W
• Nominal impedance: 8 ohms and 16 ohms
• Sensitivity: 100dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Rounded copper
• Magnet type: Ceramic
• Magnet weight: 50oz, 1.42kg
• Frequency range: 75-5000Hz
• Resonance frequency, Fs: 75Hz
• DC resistance, Re: 7.3 ohms & 12.9 ohms
• Mounting Information
• Diameter: 12.2", 309mm
• Overall depth: 5.3", 135mm
• Magnet structure diameter: 6.1", 156mm
• Cut-out diameter: 11.1", 283mm
• Mounting slot dimensions: 0.31", 7.9mm
• Number of mounting slots: 4
• Mounting slot PCD: 11.7", 297mm
• Unit weight: 10.4lb, 4.7kg
• G12T-75 12" Speaker
• Nominal diameter : 12", 305mm
• Power Rating: 75W
• Nominal impedance: 8 and 16 ohms
• Sensitivity: 97dB
• Chassis type: Pressed steel
• Voice coil diameter: 1.75", 44.5mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 35oz, 0.99kg
• Frequency range: 80-5000Hz
• Resonance frequency, Fs: 85Hz
• DC resistance, Re: 6.77 & 12.9 ohms
• Mounting Information
• Diameter: 12.2", 309mm
• Overall depth: 5.0", 127mm
• Magnet structure diameter: 5.7", 145mm
• Cut-out diameter: 11.1", 283mm
• Mounting slot dimensions: 0.31", 7.9mm
• Number of mounting slots: 4
• Mounting slot PCD: 11.7", 297mm
• Unit weight: 7.7lb, 3.5kg