|
|
|
|
|
The Denon DN-X900 offers tremendous flexibility and intuitive control.
Denon's DN-X900 is a 4U rackmountable mobile/club DJ analog/digital matrix mixer with rock-solid construction
and superb audio fidelity. The DN-X900 DJ mixer offers 4 coaxial digital inputs with 24-bit digital processing and 2 digital
outputs that can feed your CDR burner or computer for recording purposes with a unique Track Mark ID function that allows
you to make new track increments right from the mixer. 2 digital outputs are also provided in S/PDIF coaxial and TOSLINK formats.
The DN-X900's 8 line and 3 phono inputs are assignable to any of 4 channels. This 8-channel input matrix routing gives you
the freedom to move any source to any channel or even the same source to multiple channels for remixing. The rack mixer features
4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with contour adjustment. Independent
pre-fader level meters allow you to optimize and match levels for each source, so you can be sure the transition crossfading
between sources is smooth.
The Denon DN-X900 DJ Mixer also features 3-band EQ with full output kill, booth output with
channel select, 2 mic inputs with talkover sensitivity and effects send/return with cue, dry/wet knob, and channel select.
Denon DN-X900 PRO DJ Mixer Features:
- Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels
- 8 line/3 phono switchable inputs
- 4 digital inputs, 2 digital outputs
- Professional flex fader with contour
- Digital Track Mark feature
- Responsive 45mm VCA crossfader with contour adjust
- Independent channel PFL meters: all input levels can be pre-adjusted in advance to match the gain levels, insuring a smooth
transition between fades
- Independent 3-band EQ kill (High-Mid-Low)
- Independent EQ on/off switch
- Booth output assign selector: pre-monitor any channel including Master through the booth output as you would with your
headphones, with volume control!
- External send/return control: multichannel assignable, effect on/off, effect cueing (pre & post), effect dry/wet knob
- Independent channel A-B post switch (crossfader)
- Powerful, clean headphone output
- Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with all Denon DJ CD/MP3 players
- Compact 4U rackspace with recessed rear terminals
- Independent 3-band main and aux mic EQ
- Independent CUE system (all channels)
- 2 mic inputs with talkover function with sensitivity adjustment
- Split/cue headphone monitor with PFL metering
- Master output -10dB attenuation switch
- Master output stereo/mono switch
- Record out - RCA/unbalanced
- Subwoofer/lighting output with freq. adjust: ideal for powered speakers, powered amp, or even a signal feed for lighting
systems
The versatile DN-X900 Professional 19" Analog/Digital Mixer can be yours today at the guaranteed
lowest price. Order now!
Denon DN-X900 PRO DJ Mixer Specifications:
- Dimensions: 19"W x 4-2/5"H x 6-9/10"D (482 x 112.5 x 177mm)
- Weight: 13 lbs. (5.9 kg)
- Power supply: AC120 V ±10%, 60Hz
- Power consumption: 33W
AUDIO SECTION
Input Level and Impedance
- 8-line -14dBV (200 mV) 50kOhms
- 3-phono -50dBV (3.0mV) 50kOhms
- Effect (Return) -14dBV (200mV) 50kOhms
- Main mic -54dBV (2.0mV) 10kOhms
- Aux mic -60dBV (1.0mV) 10kOhms
Output Level and Impedance
- Balanced 4dBm (1.23V) 600 ohms
- Unbalanced 0dBV (1.0V) 1kOhm
- Booth/zone (balanced) 4dBm (1.23V) 600 ohms load
- Rec (RCA) -10dBV (316mV) 1kOhms
- Effect (Send) -14dBV (200mV) 1kOhm
- Subwoofer/Lighting 2 dBm (975 mV) 600 ohms
- Headphone 0dBV (1.0V) 32 ohms
Frequency Response
- Line 20 to 20kHz ±2dB
- Phono 20 to 20kHz RIAA ±2dB
- Mic 20 to 20kHz ±2dB
Signal to Noise Ratio
- Line 82dB (0dBm, 1kHz, EQ flat)
- Phono 75dB (0dBm, 1kHz, EQ flat)
- Main Mic 65dB (0dBm, 1kHz, EQ flat)
Total Harmonic Distortion Rate
- Line below 0.05%
- Phono below 0.05%
- Crosstalk over 70dB
Channel Equalizer
- Hi +10dB, -35dB (16kHz)
- Mid +10dB, -35dB (1kHz)
- Low +6dB, -35dB (60Hz)
Microphone Equalizer
- Hi +12dB, -12dB (10kHz)
- Mid +12dB, -12dB (1kHz)
- Low +12dB, -12dB (100Hz)
Digital Output (COAXIAL/TOSLINK)
- Signal format IEC958 Type II
- Output level 0.5 Vp-p 75 ohms
- Output signal level -6dB
Digital Input (COAXIAL)
- S/PDIF 32-48kHz 16,20 bit
- Input Level 0.5 Vp-p 75 ohms
|
|
|
|
|
|
|