3 independent stereo channels, 15m range, and non-compressed audio with a 48kHz sample rate.

The E-MU PIPEline wireless transmitter and receiver system frees you from the tyranny of audio cables without sacrificing audio quality. E-MU PIPEline works as a wireless transceiver for your guitar or keyboard, or as the basis of a wireless in-ear monitoring system for your band. Because latency is so critical in music performance, PIPEline has a minimal delay of only 5.5ms, so it won't interfere with the feel of your music.

With E-MU PIPEline connected to your musical instrument, you'll be able to move freely in a 15 meter range from the receiver. If your other band mates want to join the wireless revolution, they can, because PIPEline has 3 independent stereo channels. Each instrument stays completely independent with zero crosstalk.

Have you always wanted an in-ear monitoring system, but couldn't justify the high price? E-MU PIPEline is the perfect solution for low-cost in-ear monitoring. Because PIPEline has 3 channels, you can have 3 separate stereo monitor mixes, or 1 transmitter can send a group mix to multiple receivers.

PIPEline's Audio quality is superb with no-compression and a 48kHz sample rate (better than CD). Encryption key handshaking between transmitter and receiver eliminates the possibility of picking up other wireless sources.

Because E-MU PIPEline works with any audio device, you can wirelessly connect any of your other audio gear. For example, use PIPEline to connect your iPod or MP3 player—or computer—to your stereo system, or put remote speakers in another room of your house without the hassle of routing speaker wires!

E-MU PIPEline Wireless Transmitter and Receiver System Features:

• Mobile wireless transmit or receive
• Each Pipeline can be configured as a transmitter or receiver
• Better than CD Quality Digital Audio
• Low-latency
• 15M (49ft) range:
• Rechargeable battery Lasts up to 10 hours in receive mode and 6 hours in transmit mode
• Analog/Digital inputs or outputs

E-MU PIPEline Wireless Transmitter and Receiver System Includes:

• power adapter/charger and cables

Connect to the PIPEline for affordable wireless freedom. Order today!

E-MU PIPEline Wireless Transmitter and Receiver System Specifications:

• I/O Configuration
  
• Two RCA Flexi-Jacks can be configured either as inputs or outputs
• The two RCA Flexi-Jacks can also be configured either as analog or digital (S/PDIF 48kHz)
  
  Connectivity
• Audio Line In/Out — 3.5mm (1/8") stereo jack
• S/PDIF 48kHz or RCA Audio Line In/Out
  
  Audio Performance
• Frequency Response: 20Hz-20kHz +/- 0.15dB
• Signal-to-Noise Ratio: (SNR) 98dB (typical)
• Latency: 5.5ms in Dedicated Pairing Mode, 10ms in Broadcast Mode
  
  Rechargeable Battery
• Battery Life: 5 to 8 hours (typical)
• Charge Time: 3 hours (typical)
  
  Power Adapter
• Supply Voltage: 5V
• Current: 1A
• Power: 5W
• Tip-Positive
  
  Radio Frequency
• Operating RF range: 2400 - 2483.5MHz
• Number of RF channels: 3
• RF transmitter power output: 16 dBm (typical)
  
  Minimum System Requirements
• AC Power 100/240V
• (2) PIPElines are required (transmitter & receiver) or
• (1) LONGboard/SHORTboard (with built-in PIPEline transmitter) and (1) PIPEline