A system that covers a 4-piece band.
The Galaxy Audio AS-1100 UHF Wireless Personal Monitor Band Pack gives you enough transmitters to keep
all your band members on the same page. The single rackmount AS-1100T transmitter has stereo XLR/1/4" inputs, headphone output,
and an LCD display which display the channel and input level. The 4 AS-1100R receivers have LCD displays with channel, battery
level, and RF/AF indicators. Combined they give you 120 UHF channels and 300' to work with. 4 sets of Earbuds are included.
Galaxy AS-1100-4 Band Pack Wireless Personal Monitors Features:
- Single rackmount AS-1100T transmitter
- 4 AS-1100R body-pack receivers
- 300' range
- UHF frequency
- Earbuds
AS-1100T Wireless Transmitter
- Transmits in stereo or mono
- Light up LCD display
- Channel number and frequency
- 120 selectable channels
- XLR/1/4" combo input
- AF L/R indicator
- RF output
- 10mW
AS-1100R Wireless Receiver
- LCD display with backlight
- Headphone output Volume control
- 4-bar battery life Indicator
- RF and AF indicator
- 100 mW headphone output
- Runs on 2 'AA' Batteries
- Earbuds Included
- 80 mW Audio Output
- 3.5 oz (100g)
An affordable wireless monitor solution to help keep your band in sync. Order today!
Galaxy AS-1100-4 Band Pack Wireless Personal Monitors Specifications:
- AS-1100 system
- Frequency range and transmitter output level
- Band: UHF
- Frequency Range: 655 MHz and 679 MHz
- Transmitter Output Level: 10dBm
- Operating Range: Under Typical Conditions 300' (92m)
- Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response: +/-3dB 60Hz~16KHz
- Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1%
- Dynamic Range: >90dB A-weighted
- Operating Temperature: Range 14°F to 122°F (-10 C° to +50 C°)
- Note: battery characteristics may limit this range
AS-1100T transmitter
- Max Audio input level: +6dBV
- Gain adjustment range: 40dB
- Input impedance: 100KOhms
- Dimensions (HxWxD): 1.5" x 8.3" x 3.78" (38mm x 212mm x 96mm)
- Weight: 21oz. (605g)
- Power requirements: 12-18VDC at 300mA supplied by external power supply
- XLR input: Impedance balanced
- Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
AS-1100R Body-pack Receiver
- Audio Output Level: 100mW
- Sensitivity: -94dBm for 30dB
- Image Rejection: >55dB
- Dimensions (HxWxD): 3.74" x 2.6" x 1" (95mm x 65mm x 25mm)
- Weight: 3.5oz (100g) without batteries
- Power Requirements: 2 "AA" size alkaline or rechargeable batteries
- Battery life: About 5 hours