Affordable UHF headset system that's easy to use and packed with user-friendly features.
The Galaxy Audio TRC Wireless Microphone System features the TRCR UHF diversity receiver with 120 selectable
channels. It uses IR Sync to link its frequency to the MBP64 transmitter. The LCD display on the TRCR shows channel number,
frequency, volume output, and RF/AF indicator, while the MBP64's LCD display has a 4-bar battery life indicator, and shows
you what group, channel, and frequency you're on. It also comes with an AH-HS unidirectional headset microphone. The full
wireless mic system gives you 300' of freedom.
Galaxy TRC/64HS WIRELESS HEADSET SYSTEM Features:
- TRCR Wireless Receiver
- LCD display
- AF/RF indicators
- IR Sync
- Diversity Antennas
- Squelch Adjustment
- XLR/1/4" Outputs
MBP64 Wireless Transmitter
- IR Sync
- 2 'AA; batteries
- Mic/0/-10dB channel selector
- Group, channel, and
- frequency display
- 4-bar battery life indicator
- LCD display
- 10mW
- 3oz (85g)
AS-HS
- Unidirectional headset
Order today and experience wireless freedom.
Galaxy TRC/64HS WIRELESS HEADSET SYSTEM Specifications:
- System
- Frequency Range: 655~679MHz
- Transmitter Output Level: 10dBm
- Band: UHF
- Operating Range: Under Typical Conditions 300' (92m)
- Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency response: ±3dB 70Hz-16KHz
- Total Harmonic Distortion: ±30KHz deviation 1KHz tone <1%
- Dynamic Range: >90dB A-weighted
- Operating Temperature: Range 14°F to 122°F (-10 C° to +50 C°)
- Note: battery characteristics may limit this range
TRCR
- Audio Output Level: (±30KHz deviation, 1KHz tone) XLR connector (into 600Ω load) -12dBV 1/4" connector (into
3KΩ load) -18dBV
- Output Impedance: XLR connector 200Ω 1/4" connector 1KΩ
- XLR output: Impedance balanced
- Pin1: Ground (cable shield)
- Pin2: Audio
- Pin3: No Audio
- Sensitivity: -94dBm for 30dB SINAD, typical
- Image Rejection: >80dB
- Dimensions (HxWxD): 1.7" x 8.3" x 6.3", (44mm x 212mm x 160mm)
- Weight: 32.5oz (920g)
- Power Requirements: 12-18 V DC at 400mA, supplied by external power supply
MBP64
- Max Audio Input Level: 0dBV to +10dBV
- Gain Adjustment Range: 20dB
- Input Impedance: 470KΩ
- Dimensions (HxWxD): 3.3" x 2.6" x 1" (85mm x 65mm x 24mm)
- Weight: 3.1oz (88g) (without batteries)
- Power Requirements: 2 'AA' batteries alkaline or rechargeable batteries
- Battery Life: About 6 hours
AS-HS
- Sensitivity: -65 —4dB (0dB=1V/UBR 1KHz)
- Frequency response: 50Hz-18kHz
- Output impedance: 2KΩ Max. (RL-2.2KΩ)
- Directionality: Uni-directional
- Working voltage range: 1-10V
- Standard working voltage: 3V
- Current consumption: 250UA (Max.)
- Maximum input sound pressure: 110dB SPL
- S/N ratio: >38dB