Two 192kHz analog channels and two 96kHz digital channels with onboard digital mixer.

The Lynx L22 PCI CArd is an excellent choice for mastering and broadcast facilities where the quality and stability of your audio are crucial. The professional Lynx L22 audio interface card is also intended for use in the most demanding audio recording, post-production, and sound measurement applications. IThe L22 PCI Card offers 2 192kHz analog channels and 2 96kHz digital channels with the same audio engine as the Lynx LynxTWO. Using proprietary circuit topologies and custom components in the analog stages, along with the latest converter technology, the L22 PCI card achieves a 117dB dynamic range. Most importantly, Lynx incorporates advanced noise-rejection design techniques into the L22 card to maintain this performance uniformly from computer to computer.

The digital mixer onboard the L22 is extremely flexible adapting it to any studio or workstation configuration. Each of the mixer's 16 outputs is capable of mixing signals from 16 physical inputs or 16 playback tracks with 32-bit precision.

As with other Lynx products, the L22 PCI Card provides plenty of compatibility with a wide range of platforms and operating systems. Lynx device drivers are developed in-house to ensure quality and robust operation.

Lynx Lynx L22 PCI Card Features:

• 200kHz sample rate / 100kHz analog bandwidth (supported with all drivers)
• Two 24-bit balanced analog inputs and outputs
• +4dBu or -10dBV line levels selectable per channel pair
• 24-bit AES3 or S/PDIF I/O with full status and subcode support
• Sample rate conversion on digital input
• Non-audio digital I/O support for Dolby Digital and HDCD
• 32-channel/32-bit digital mixer with 16 sub outputs
• Multiple dither algorithms per channel
• Word, 256 Word, 13.5MHz or 27MHz clock sync
• Extremely low-jitter tunable sample clock generator
• Dedicated clock frequency diagnostic hardware
• Multiple-board audio data routing and sync
• Two LStream ports support 8 additional I/O channels each
• Compatible with LStream modules for ADAT and AES/EBU standards
• Zero-wait state, 16-channel, scatter-gather DMA engine
• Windows 2000/XP/XPx64/Vista/Vistax64: MME, ASIO 2.0, WDM, DirectSound, Direct Kernel Streaming, and GSIF
• Macintosh OSX: CoreAudio (10.4)
• Linux, FreeBSD: OSS
• RoHS Compliant

Order this PCI card today to see the difference it makes in your mastering and broadcasting.

Lynx Lynx L22 PCI Card Specifications:

• General
• PCI bus: Version 2.2 compliant
• Data transfers: Up to 132MBps using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering
• Size: 5.0"H X 7.4"W X 0.75"D (half-size PCI card)
• Certifications: CE and FCC Class B
  
  Analog I/O
• Number: Two inputs / Two outputs
• Type: Electronically balanced or unbalanced, XLR connectors on L2Audio cable
• Level: +4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs
• Bandwidth: < 10Hz-92kHz @ 200kHz sample rate, < 10Hz-46kHz @ 96kHz sample rate, < 10Hz-23kHz @ 48kHz sample rate, (analog input to analog output)
• Input impedance: balanced mode: 24kW, unbalanced mode: 12k
• Output impedance: balanced mode: 100W, unbalanced mode: 50W
• Output drive capability: 600W impedance, 0.2µF capacitance
• A/D and D/A type: 24-bit, multi-level, delta-sigma
• Sample Rates: 8kHz to 200kHz, including all standard rates with variable adjustment
• Bit Depth: 8-, 16-, 24- or 32-bit file types
• Onboard buffer size: 16 KB per input and output stream (mono or stereo)
  
  Analog In Performance
• (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
• Frequency response: 20-20kHz, ±0.05dB at 44.1kHz sample rate
• Dynamic range: 117dB, A-wtd.
• Signal-to-Noise: 116dB, A-wtd.
• Channel crosstalk: <-120dB, 1kHz signal @ -1dBFS
• Input THD+N: -108dB (0.0004%) @ -1 dBFS, -104dB (0.0006%) @ -8dBFS, 1kHz signal, 22Hz-22kHz BW
  
  Analog out performance (Analog performance specs measured at 44.1kHz sample rate, 24-bit, card installed in computer)
• Frequency response: 20-20kHz, ± 0.05dB at 44.1kHz sample rate
• Dynamic range: 117dB, A-wtd.
• Signal-to-Noise: 117dB, A-wtd.
• Channel crosstalk: < -120 dB, 1 kHz signal @ -1dBFS
• Output THD+N: -97dB (0.0014%) @ -1dBFS, -104dB (0.0006%) @ -8 dBFS, 1kHz signal, 22Hz-22kHz BW
  
  Digital I/O
• Number / Type: One input and one output
• AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync cable
• Sample rates: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
• Sample rate conversion: Supports conversion ratios up to 3:1 on digital input, 128dB dynamic range
• Bit depth: 8-, 16-, 24- or 32-bits file types
• Onboard buffer size: 16KB per input and output stream (mono or stereo)
  
  LStream expansion ports
• Number: One external and one internal
• Level/Impedance: TTL/75
• Type: Input: word clock, 256X word clock, 13.5 and 27MHz clocks; Output: word clock
  
  Clock I/O
• Number: External: one input and output, BNC connectors on L2Sync cable, Internal: one input and output on board-mounted headers
• Level/Impedance: TTL/75
• Type: Input: word clock, 256X word clock, 13.5 and 27MHz clocks; Output: word clock
  
  Onboard digital mixer
• Channel capacity: 32 input channels, 16 sub outputs
• Resolution/Dither: 32-bit / TPDF, shaped TPDF, or RPDF
• Monitor mixing: Any input to multiple outputs
• Metering: Peak levels to -114dB on all inputs and outputs
  
  Connections
• Audio Port: bracket-mounted 25-pin female D-sub connector for analog audio input and output
• Sync port: bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out
  
  Cables (included)
• L22Audio Cable: 25-pin male D-sub to male and female XLR connectors on 6' shielded twisted pair cabling
• L22Sync Cable: 15-pin high-density male D-sub to (1) male and (1) female XLR on 6' shielded twisted pair cabling and (4) female BNC connectors on 2' 75W coaxial cabling
  
  Software
• Windows drivers: Windows 98/ME/NT/2000/XP: MME, ASIO 2.0, and DirectSound
• Macintosh drivers: ASIO 2.0 for OS 9
• L22 mixer application: Provides complete control of digital mixer and all hardware settings