A bodypack receiver with quality in-ear stereophones built for comfort and convenience.

The main piece of the wireless Nady PEM-500 in-ear monitoring system, the PEM-R is a UHF PLL synthesized bodypack receiver. This slim wireless receiver has a rear clip that can be rotated 90° so you can attach it either vertically or horizontally to your clothing. Some of its features include a switchable, built-in volume limiter, output level control, stereo/mono switch, 2-color, 3-way Unit On/Signal/low-battery indicators. It can operate up to 6hours on a single 9V alkaline battery.

The wireless receiver also comes with a pair of tiny, lightweight, yet powerful Koss in-ear stereophones. For your comfort and better acoustic transfer and isolation, the soft rubber foam mounts come in 3 shapes—conical, cylindrical, and hexagonal.

Nady PEM-R Bodypack Wireless Receiver (564 - 574.3MHz) Features:

• Portable bodypack wireless receiver features a power switch; switchable built-in volume limiter; Output Level control; stereo/mono select switch; two-color (red/green) 3-way Unit On/Signal/low-battery LED indicators
• Operates up to six hours (depending on volume) on a single 9V alkaline battery
• Each wireless receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear Koss stereophones with soft rubber foam mounts in three shapes (conical, cylindrical, and hexagonal); designed for fitted comfort and optimum acoustic transfer and isolation
• Rear clip can be rotated 90° for attaching the wireless receiver either vertically or horizontally to clothing

Monitor your sound while on the move. Order today.

Nady PEM-R Bodypack Wireless Receiver (564 - 574.3MHz) Specifications:

• Maximum audio output level: 20mW
• Minimum audio output load impedance: 16Ω
• RF sensitivity: 2.5uV (-100dB/12dB SINAD)
• Squelch threshold: < -90dB
• Spurious rejection: >55dBc
• Audio output connector: 3.5mm Stereo (Tip=left, Ring=Right, Sleeve=ground)
• Controls: Volume adjust, limiter ON/Off, power ON/OFF, Stereo/Mono select switches; 16-channel selector switch
• Indicators: Two-color (red/green) 3-way unit, ON/Signal/Low Battery LED
• Power requirements: 9V alkaline battery
• Current drain: < 40 mA
• Battery life: Up to 6 hours, volume dependent
• Antenna: Internal
• Dimensions: 4.2"H x 0.9"D x 2.6"W (106mm x 23mm x 66mm)
• Weight: 2.85oz. (80kg)