Low-power laser projector with frame-based aerial effects and DMX control.

The Stinger 1 low-power laser projector incorporates 28 new frame-based professional aerial effects. Frame-based effects give you more precise control over the pattern at any given moment and are normally only found in laser projectors costing thousands of dollars more. You can now manipulate the pattern via X, Y, Z controls as well as freeze-frame effects for stationary effects like Laser Sky.

Under DMX control, you can alter all 28 of the most favorite aerial laser effects. Using the last three channels; X, Y, Z axis rotation; X Axis Gain; and Y Axis Offset, you can create hundreds of variations, selectable with DMX or with sound-activation via the LED mode menu system. These effects pulse, twist, and turn with the beat of the music.

The extra-wide-scan angle makes for incredibly wide aerial laser scans. The Stinger's images are not intended for patterns on the wall. The design of the Stinger was specifically intended for raw aerial performance that is not compromised by constraints of systems designed for on-screen images. Stinger 1 Series can easily target bounce mirrors and remote effects as well as strategically place laser effects for the total aerial laser beam and scanning show!

OmniSistem Stinger 1 Laser Projector Features:

• Features: 28 patterns, single-color control
• DMX-512 (7-channels) Standalone sound-activated
• Y-Axis Offset X-Axis Gain
• Y-Axis Rotation of Effects X-Axis Rotation of Effects
• Z-Axis Rotation Pattern Speed
• Pattern Hold
  
  DMX: 7 Channels
• CH1: Laser on/off - Stand-Alone setting (909)
• CH2: Sound Active - 909)
• CH3: Pattern - Multi-Color Mode (N/A)
• CH4: Pattern Speed/Hold - Diagnostic Modes (N/A)
• CH5: X-Axis Rotation - Green/Blue Laser on (901)
• CH6: Y-Axis Rotation - Red Laser on (902)
• CH7: Y Offset/X Gain - Yellow (both green & red on) (903)

Now you can create professional laser effects that were once only possible with laser projectors costing thousands more!

OmniSistem Stinger 1 Laser Projector Specifications:

• Output: <4.95mW
• Cooling: TE-cooling
• Stabilization: OST
• Number of ports: 1
• Type: LAD
• FDA class: R