A loudspeaker system that delivers high output, and low distortion bass from a single 18" Pro Rider woofer

Peavey proudly introduces its redesigned SP118 18" subwoofer that features the durable Hammertex covering and exterior with full-front metal grilles, and has an aspen hardwood plywood enclosure.

The SP118 subwoofer was designed to compliment the SP Series family of enclosures. It is engineered for optimal sound reproduction with proven reliability continuing a 30-year legacy. With its enormous 2,400W peak power handling, there will be no problem getting your sound heard. The Pro Rider Black Widow subwoofer with Kevlar / carbon-fibercone and field-replaceable basket, flat-wound 4" voice coil and cast-frame basket, provide massive amounts of lows. It also features the patented Radialinear Planar Phase Correction System, and titanium compression drivers with ferrofluid cooling.

Made in the USA.

Peavey SP 118 18" Subwoofer Features:

• 2400 watts peak power handling
• 18" Pro Rider Black Widow subwoofer
• Frequency response: 49 Hz to 300 Hz +/- 3 dB
• Sensitivity: 98 dB (1W/1m) anechoic
• Aspen hardwood plywood enclosure
• Hammertex finish
• Patented Asymmetrical Quadratic Throat Waveguide technology
• Patented Radialinear Planar Phase Correction System
  
  Made in the USA

Save BIG when you buy today!

Peavey SP 118 18" Subwoofer Specifications:

• Frequency Response, 1 Meter On-Axis, Swept-Sine in Anechoic Environment: 49 Hz to 300 Hz (±3 dB)
  
  Usable Low Frequency Limit (-10 dB point): 34 Hz
  
  Power Handling:
• 600 Watts continuous 1,200 Watts program 2,400 Watts peak
  
  Sound Pressure Level, 1 Watt, 1 Meter in
• Anechoic Environment: 98.0 dB (2.83 V input)
  
  Maximum Sound Pressure Level (1 meter): 126.0 dB SPL continuous, 132.0 dB SPL peak
  
  Radiation Angle Measured at -6 dB
• Point of Polar Response: Essentially omnidirectional
  
  Transducer Complement: One 18" woofer, vented, 1808-8 ALCP Pro Rider
  
  Box Tuning Frequency: 38 Hz
  
  Minimum Recommended Active Crossover Frequency and Slope for Bi-amping:
• 90 Hz at 18 dB / octave
• High-pass filter 35 to 40 Hz at 12 to 24dB/octave is recommended
  
  Impedance (Z):
• Nominal: 8.0 Ohms
• Minimum: 6.5 Ohms
  
  Input Connections:
• One four-pin Neutrik jack, Two 1/4" jacks, All inputs in parallel
  
  Enclosure Materials & Finish:
• Aspen hardwood plywood with internal bracing
• Finished in Hammertex covering
  
  Dimensions (H x W x D): Width: 20.80" / 528mm, Depth: 29.88" / 759mm, Height: 32.29" / 820mm
  
  Net Weight: 107 lbs. (48.5 kg)