Required for use of MultiFace or DigiFace with a desktop computer.

The Hammerfall HDSP PCI Card includes 2 Sync-connectors for synchronization of multiple interfaces. Based on the legendary Hammerfall PCI core with its innovative zero CPU load technology the new PCI core is even more optimized for performance. Thanks to the latest chip technology internal hi-speed RAM can be used faster and more efficiently than external RAM.

The PCI engine of the Hammerfall DSP System is built on a Zero wait state PCI Busmaster core. With up to 130MBs transfer rate in both directions the maximum performance available on the 32-bit PCI bus is used. Additionally the card offers highest compatibility by being 100% plug-and-play compatible under Windows and MacOS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions.

The connection between PCI card and I/O box is established using ordinary firewire cable (IEEE 1394, 6-pole.) The data transfer does not use Firewire protocol, but a special proprietary bus protocol. The supplied cable is 4.5 m (15 ft.) long, a cable length up to 10 m (33 ft.) has been successfully tested. A specially designed Repeater can be used to reach cable lengths of up to 20 m (66 ft.) The PCI card operates as power supply for the attached I/O-box. �

If you use MultiFace or DigiFace with a desktop computer, this is the card you must have. Order today.

RME Hammerfall HDSP PCI Card Specifications:

• Short PCI 2.0 compliant PCI card
• Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions)
• 32 bit, 3.3 V compatible
• Output: IEEE 1394 connector
• Package contents: PCI card, cable 4.5 meter (15 ft) IEEE 1394, internal cable 3-pole