Accurate sound reproduction in an unobtrusive overhead microphone.

The MX202 Microflex condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202 features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The inline preamp offers easy microphone stand or ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. Includes mic stand adapter.

Also available with a plate-mounted preamp (see product # 270396). Requires phantom power.

Shure MX202 MicroFlex Condenser Microphone with Inline Preamp Features:

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Balanced, transformerless output for increased immunity to noise over long cable runs
• Supplied stand-mount adapter for portable applications

Save BIG when you buy today!

Shure MX202 MicroFlex Condenser Microphone with Inline Preamp Specifications:

• Frequency Response
• 50 to 17,000 Hz
  
  Output Impedance
• 180 ohms actual (EIA rated at 150 ohms)
  
  Sensitivity (At 1,000 Hz, open circuit voltage*)
• Cardioid: -35.0 dBV/Pa (17.8 mV)
• Supercardioid: -33.5 dBV/Pa (21.1 mV)
• All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
  
  Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
• Cardioid: 124.2 dB
• Supercardioid: 122.7 dB
• All values +6 dB at 0 gain
  
  Equivalent Output Noise (A-weighted)
• Cardioid: 28.0 dB SPL
• Supercardioid: 26.5 dB SPL
  
  Signal to Noise Ratio (referenced at 94 dB SPL)
• Cardioid: 66.0 dB
• Supercardioid: 67.5 dB
  
  Dynamic Range at 1 k ohm load
• 96.2 dB
• 100 dB at 0 gain
  
  Common Mode Rejection
• 45.0 dB minimum
  
  Preamplifier Output Clipping Level (1% THD)
• -6.0 dBV (0.5 V)
• -12 dBV at 0 gain
  
  Polarity
• Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  
  Power Requirements
• 11 to 52 Vdc phantom, 2.0 mA
  
  Environmental Requirements
• Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
  
  Relative Humidity
• 0 to 95%
  
  Cable Length
• 9 m (30 ft)