A versatile wireless solution for brass or percussion instruments.

This SLX Instrument Wireless System includes an SLX4 Diversity Receiver, a Shure WB98H/C Clip-On Cardioid Condenser Instrument Microphone, and a Shure SLX1 Bodypack Transmitter.

Shure SLX4 Wireless Receiver
The SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Shure WB98H/C Clip-On Cardioid Condenser Instrument Microphone
The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Shure SLX1 Bodypack Transmitter
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, Lavalier, instrument microphones, or with guitars or basses, the Shure SLX1 is the definition of reliability. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Shure SLX14/BETA98H Instrument Wireless System Features:

• SLX4 Wireless Receiver:
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
  
  WB98H/C Clip-On Cardioid Condenser Instrument Microphone
• Transformerless preamplifier circuitry, which improves linearity across the full frequency range
• High gain-before-feedback
• Excellent rejection of unwanted noise
• High maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments
• Tailored frequency response for studio quality performance
• Wide dynamic range for use in high SPL environments
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
• Compact design reduces stage clutter
• Detachable cable for easy storage
• Legendary Shure quality, ruggedness, and reliability
  
  SLX1 Bodypack Transmitter
• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 518 - 782 MHz operating range

Legendary Shure quality, ruggedness, and reliability. Order today.

Shure SLX14/BETA98H Instrument Wireless System Specifications:

• SLX4 Wireless Receiver:
• Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
• Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
• XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
• Sensitivity: —105 dBm for 12 dB SINAD, typical
• Image Rejection: >70 dB, typical
• Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
• Operating Range Under Typical Conditions: 300 ft. (100m)
• Note: Actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
• Note: Overall system frequency depends on microphone element.
• Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
• Dynamic Range: >100 dB A-weighted
• Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
• Note: battery characteristics may limit this range
• Dimensions (H x W x D): 1.65 x 7.76 x 5.28", (42 x 197 x 134mm)
• Weight: 1lb. 13oz. (816g )
• Housing: Galvanized steel
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4" output
• Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
  
  WB98H/C Clip-On Cardioid Condenser Instrument Microphone
• Type: Condenser (electret bias)
• Frequency Response: 20 to 20,000 Hz
• Polar Pattern: Supercardioid (as supplied), uniform with frequency, symmetrical about axis (Cartridge for cardioid polar pattern also available—sold separately)
• Output Level (at 1,000 Hz): Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical, *1 Pa = 94 dB SPL
• Maximum SPL: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: 160 dB, 1 kilohm load: 156 dB
• Preamplifier Output Clipping Level: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: + 6 dBV (2.0 V), 1 kilohm load: + 2 dBV (1.26 V)
• Dynamic Range: (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load): 125dB (max SPL minus A-weighted noise)
• Output Noise: 35dB SPL, A-weighted
• Signal-to-Noise Ratio: 59dB re 94dB SPL
• Output Impedance: Rated at 150 ohms (actual)
• Recommended minimum load impedance: 1 kilohm
• Hum Pickup: -7.5dB equivalent SPL in 1 mOe field (60Hz)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Phantom Power: 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3
• Case: Microphone: Matte black enamel brass case and stainless steel inner grille, Preamplifier: Matte black enamel finished steel
• Dimensions: Microphone: 11.7mm x 35.6mm (0.46" X 1.40"), Preamplifier: 20mm x 99mm (0.79" X 3.89")
• Net Weight: Microphone: 12g (0.4oz) less cable, Preamplifier: 96g (3.4oz)
  
  SLX1 Bodypack Transmitter
• Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
• Gain Adjustment Range: 30dB
• Input Impedance: 1 Mohms
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
• Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
• Weight: 81 grams (3 oz.) without batteries
• Housing: Molded ABS case
• Power Requirements: 2 "AA" size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)