Shure quality wireless at an affordable price.

The Shure SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, the receiver is ready for immediate installation right out of the box. LX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Shure SLX4 Wireless Diversity Receiver Features:

• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs

Order today and receive the benefits.

Shure SLX4 Wireless Diversity Receiver Specifications:

• Audio Output Level (ref. ± 38 kHz deviation with 1 kHz tone): XLR connector (into 600 Ohm load): —13 dBV; 1/4 inch connector (into 3000 Ohm load): —2 dBV
• Output Impedance: XLR connector: 200 Ohms; 1/4 inch connector: 1kohms
• XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
• Sensitivity: —105 dBm for 12 dB SINAD, typical
• Image Rejection: >70 dB, typical
• Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
• Operating Range Under Typical Conditions: 300 ft. (100m)
• Note: Actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
• Note: Overall system frequency depends on microphone element.
• Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
• Dynamic Range: >100 dB A-weighted
• Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
• Note: battery characteristics may limit this range
• Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
• Weight: 1 lb. 13 oz. (816 g )
• Housing: Galvanized steel
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
• respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
• Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC