Studio-quality sound in a rugged stage mic.

The Shure SM86 Cardioid Condenser Vocal Mic gives you all the advantages of Shure's SM line with condenser mic clarity. It's ruggedly built to handle touring, with a frequency response tailored for clear reproduction of vocals. The cardioid polar pattern minimizes background noise and feedback. The SM86 has a built-in 3-point shockmount for minimizing handling noise and a 2-stage filter for reducing breath noises and pops.

It requires phantom power.

Shure SM86 Cardioid Condenser Vocal Mic Features:

• Condenser capsule provides studio-quality sound
• Rugged design handles the abuses of touring
• Tailored frequency response for clear reproduction of vocals
• Cardioid polar pattern minimizes unwanted background noise
• Works excellently with both stage monitors and in-ear personal monitors
• Built-in 3-point shockmount minimizes handling noise
• 2-stage filter reduces wind and breath pop noise

Order today and let your vocals shine through.

Shure SM86 Cardioid Condenser Vocal Mic Specifications:

• Transducer type: Condenser (electret bias)
• Frequency response: 50 to 18,000Hz
• Polar Pattern: Cardioid
• Output Impedance: 150Ω at 1kHz (Recommended minimum load impedance: 600Ω)
• Sensitivity (at 1,000Hz): Open Circuit Voltage: -50dBV/Pa (3.15 mV) (1 Pa = 94dB SPL)
• Output Clipping Level: 1000Ω Load at 1,000Hz: +3dBV (1.41 V)
• Maximum SPL (at 1,000Hz): 1000Ω load (1% THD): 147dB
• Self-Noise: 23dB typical, A-weighted
• Dynamic Range (1000Ω): 124dB (maximum SPL to A-weighted noise level
• Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)*
• *S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
• Power (Phantom Supply Requirement): 11 to 52 VDC, positive at both pins 2 and 3
• Current Drain: 5.2 mA
• Connector: Three-pin (XLR) professional audio
• Dimensions (H x W): 183mm x 49mm, 7.2" x 1.92"
• Net Weight: 278g (9.8oz.)
• Environmental Conditions;Operating: -18° to 60° C (0° to 135° F) (relative humidity >90%), Storage: -29° to 74° C (-20° to 165° F) (relative humidity >80%)