Professional grade.

The Shure ULXP24D/BETA58 Dual Handheld Wireless Microphone System includes two ULXP4 Diversity Receivers, and two ULX2 Handheld Transmitters fitted with Beta SM58A Mic capsules. Shure ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional wireless systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously.

ULXP4 Wireless Diversity Receiver
The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX2 Handheld Transmitter
The ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.

Beta 58A Vocal Microphone
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Beta 58A mic maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close—up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Shure ULXP24D/BETA58 Dual Handheld Wireless Microphone System Features:

• ULXP4 Wireless Diversity Receiver
• Automatic Frequency Selection with group scan function
• Over 1400 selectable frequencies
• Predictive Diversity
• 5-segment transmitted audio signal strength meter
• 5-segment RF meter
• 3-segment transmitter battery fuel gauge
• Advanced multi-function LCD displays group and channel
• Mic/Line switch
• Remotable 1/2-wave antenna
• Frequency and volume lockout
• XLR and 1/4-inch output
• Rugged metal chassis
• 1/2 rack design
  
  ULX2 Handheld Transmitter
• 8-9 Hour Battery Life
• Power: On/Off Switch, Battery
• LED-Green When ON, Red When Battery Low
• Three-segment Battery Power Icon
• PEAK Icon-Appears When Audio Signal Overloads
• Group/Channel Displays
• SET Button for Saving Settings
• Adjustable Audio Gain Control
• Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
• 4-pin Mini Connector
• Battery Cover Unscrews to Expose Battery and Gain Control
• 9V Battery Included
  
  Beta 58A Vocal Microphone
• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off—axis sound
• Neodymium magnet for high signal—to—noise output
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Minimally effected by varying load impedance
• Legendary Shure quality and reliability

Order today and experience the best in wireless.

Shure ULXP24D/BETA58 Dual Handheld Wireless Microphone System Specifications:

• RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
• used). Refer to the frequency supplement supplied with the system.
• Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
• Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
  
  ULXP4 Receiver Input
• Connector: Antenna Power Input
• Connector Type: BNC IEC 320
• Actual Impedance: 50 Ohms
• Nominal Input Level: —95 to —30 dBm 15 VDC
• Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
• Pin Assignments: Shell = Ground Center = Signal IEC Standard
• Voltage for Remote Power: 12 Vdc, 150 mA maximum
  
  ULXP4 Receiver Output
• Connector: High Z Audio; Low Z Audio
• Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
• Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
• Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
• Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
  
  ULX2 Transmitter Input
• Input Configuration: Unbalanced, active
• Actual Impedance: 20 kohms
• Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.
  
  ULX2 Transmitter Output
• Actual Impedance: 50 Ohms
• Nominal Output Level: 20 mW
• Maximum Output Level: 30 mW
• Pin Assignments: Shell = Ground Center = Signal
  
  Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
• voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
• Transmitter Gain Adjustment Range: ULX1: 25 dB
• Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
• XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
• 1/4 inch connector (into 3000 ohm load): —2 dBV
• Impedance: ULX2 (input): 1 Megohm; ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
• Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
• RF Power Output: ULX2: 30 mW maximum
• Dynamic Range: >100 dB, A-weighted
• RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
• Image Rejection: 80 dB typical
• Spurious Rejection: 75 dB typical
• Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
• System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
• Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
• Battery Life: 8 to 9 hours (with 9V alkaline battery)
• Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
• NOTE: Battery characteristics may limit this range
• NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously
  
  ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
• ULXP4 Weight: 2 lbs 7 oz. (1105 g)
  
  ULX2/BETA 58 Dimensions (Length x Diameter): 8.7 x 2 in. (220.9 x 51 mm)
• ULX2/BETA 58 Weight: 9.1 oz. (258 g) without battery
  
  Beta 58A Vocal Microphone
• Type: Dynamic (moving coil)
• Frequency Response: 50 to 16,000 Hz (NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.)
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
• *1 Pa = 94 dB SPL
• Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing.
• Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.