|
|
|
|
|
Tremendous flexibility and intuitive control.
Denon's DN-X500 is a 4U rackmountable mobile/club DJ analog matrix mixer with rock-solid construction
and superb audio fidelity. The DN-X500's 8 line and 2 phono inputs are assignable to any of 4 channels. This 8-channel input
matrix routing gives you the freedom to move any source to any channel or even the same source to multiple channels for remixing.
The DN-X500 DJ mixer features 4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with
contour adjustment. Independent pre-fader level meters allow you to optimize and match levels for each source, so you can
be sure the transition crossfading between sources is smooth.
The Denon DN-X500 DJ Mixer also features 3-band EQ with
full output kill, booth output with channel select, 2 mic inputs with talkover sensitivity and effects send/return with cue,
dry/wet knob, and channel select. Plus, with the optional ACD-46 rotary fader kit, you can easily swap out any channel fader.
Denon DN-X500 Pro DJ Mixer Features:
- Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels
- 8 line/2 phono switchable
- 4 smooth 60mm VCA channel faders
- Responsive 45mm VCA crossfader with contour adjust
- Independent channel PFL meters: all input levels can be adjusted in advance to match the gain levels, insuring a smooth
transition between fades
- Independent 3-band EQ kill (High-Mid-Low)
- Independent EQ on/off switch
- Booth output assign selector: pre-monitor any channel including Master through the booth
- output as you would with your headphones, with volume control
- External send/return control: multichannel assignable, effect on/off, effect cueing (pre & post), effect dry/wet knob
- Independent channel A-B post switch (crossfader)
- Powerful clean headphone output
- Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with
- all Denon DJ CD/MP3 players
- Compact 4U rackspace with recessed rear terminals
- Independent 3-band main and aux mic EQ
- Independent CUE system (all channels)
- Mic talkover function with sensitivity adjustment
- Split/cue headphone monitor with PFL metering
- Master output -10dB attenuation switch
- Master output stereo/mono switch
- Record out - RCA/unbalanced
- Subwoofer/lighting output with freq. adjust: ideal for powered speakers, powered amp, or even a signal feed for lighting
systems
The versatile DN-X500 rack mixer can be yours today at the guaranteed lowest price. Order
now!
Denon DN-X500 Pro DJ Mixer Specifications:
- General
- Dimensions: 19"W x 4-2/5"H x 6-9/10"D (482 x 112.5 x 177mm)
- Weight: 5.8kg, 13 lbs.
- Power supply: AC120 V ±10%, 60 Hz
- Power consumption: 27W
Audio Section
Input Level and Impedance:
- 8-Line-14dBV (200 mV) 50kOhms
- 2-Phono -50dBV (3.0mV) 50kOhms
- Effect (Return) -14dBV (200mV) 50kOhm
- Main Mic -54dBV (2.0mV) 10kOhms
- Aux Mic -60dBV (1.0mV) 10kOhms
Output Level and Impedance:
- Balanced 4dBm (1.23V) 600 ohms
- Unbalanced 0dBV (1.0V) 1k ohm
- Booth (Balanced) 4dBm (1.23V) 600-ohm load
- Rec (RCA) -10dBV (316mV) 1k Ohm
- Effect (Send) -14dBV (200mV) 1k Ohm
- Subwoofer/Lighting 2dBm (975mV) 600 ohms
- Headphone 0dBV (1.0V) 32 ohms
Frequency Response:
- Line 20 to 20kHz ±2dB
- Phono 20 to 20kHz RIAA ±2dB
- Mic 20 to 20kHz ±2dB
Signal to Noise Ratio:
- Line 82dB (0dBm, 1kHz, EQ flat)
- Phono 75dB (0dBm, 1kHz, EQ flat)
- Main Mic 65dB (0dBm, 1kHz, EQ flat)
Total Harmonic Distortion Rate
- Line Below 0.05%
- Phono Below 0.05%
- Crosstalk Over 70dB
Channel Equalizer
- Hi +10dB, -35dB (16kHz)
- Mid +10dB, -35dB (1kHz)
- Low +6dB, -35dB (60Hz)
Microphone Equalizer
- Hi +12dB, -12dB (10kHz)
- Mid +12dB, -12dB (1kHz)
- Low +12dB, -12dB (100Hz)
|
|
|
|
|
|
|