A compact configuration perfect for streamlined rock or alternative.

The Yamaha Tour Custom 5-Piece Fusion Floor Drum Set includes a 22" x 17" bass drum, 10" x 8" and 12" x 9" toms with mounts, 16" x 16" floor tom, a 14" x 6" x 14" matching wood snare, and it also includes the Yamaha HW-780 hardware pack. This hardware pack includes a single-chain drive bass drum pedal, a medium-weight snare drum stand, 2 medium-weight boom cymbal stands, and a single-braced hi-hat stand.

Yamaha Tour Custom Drums
All Yamaha wood drums have one thing in common: Yamaha's craftsmen create every drum shell using their exclusive staggered diagonal seam Air Seal System just as they have since 1967. Each 2- or 3-ply master ply is cut to very precise tolerance with a diagonal cut on each end. The diagonal seam in the drum shell will not separate, eliminating the need to fill gaps in the bearing edge with filler putty. These plies have glue applied and are then put into the mold by hand, one master ply at a time. The craftsman then inserts an air bag into the mold and inflates it, clamping the shell with even pressure all the way around. This process creates a drum shell that is strong, starts round, and stays round for many years.

Tour Custom drum shells are 100% maple. The bass drums are 7-ply 7mm and have a warm, deep tone; the toms are 6-ply 6mm, with lots of warmth and resonance and have a wide tuning range. The matching wood snare drum has body, yet plenty of high end and is very articulate at all dynamic levels.

All Tour Custom drums have 60° R2 bearing edges. This is something new for Yamaha on a maple shell drum set. This bearing edge has a rounder profile so that there is more shell to head contact. This gives the drums clarity in the low-end fundamental and added warmth.

Sturdy, yet simple in design; the bass drum spurs hold the bass drum firmly in place even under heavy playing. They are height adjustable using a drum key, and there are steel spikes that can be exposed when extra hold is needed. They fold up compact for transport and are marked with angle indicators so that you can set them up the same every time.

All Tour Custom toms and floor toms use the YESS (Yamaha Enhanced Sustain System). The toms have a mount attached to the shell at the nodal point by two bolts. This system allows the drum shell to vibrate freely for maximum sustain without restricting with where the placement of the drums. The floor tom brackets are small, minimal contact mounts that are located at the nodal point. They hold the legs securely in place without restricting the vibration of the shell.

Tour Custom drum sets include the TH-945 triple tom holder with Yamaha's tom ball clamp that gives you 360° rotation. The ball, made of a super-hard resin, is held in place by a single bolt making angle adjustments on the toms quick and easy. The toms lock firmly in place at virtually any angle you want. This versatile tom holder lets you mount any combination of up to three toms and/or cymbals by using either the standard or the long version of Yamaha's tom ball clamp and CH model cymbal booms.

Cymbals not included.

Yamaha HW-780 Drum Hardware pack The Yamaha HW-780 Drum Hardware pack features high-quality components manufactured to precise tolerances in Yamaha's motorcycle factory that will easily withstand the rigors of even the most hard-hitting drummers.

FP-7210 Bass Drum Pedal
Single chain drive pedal provides smooth, quiet action that will satisfy the requirements of any musical style. Additional features includes a real felt beater, a spring lock system, great footboard and heel designs and the ability to adjust footboard and beater angles. Reinforced footboard hoop clamps and horizontal frame stabilizers.

SS-740A Snare Drum Stand
This medium-weight snare drum stand provides sturdy support for your prized snare drums. It features single-bracing, a compact design, and is height-adjustable for your playing comfort.

(2) CS-755 Medium-weight Boom Cymbal Stands
Built with the modern drummer in mind. Their sturdy design and high-quality appointments make these stands a choice you can be proud of. They feature single-braced legs, vertical tilters, 17" hideaway boom arms with memory locks, boom tilter clamps that hold the booms securely in place, and tube caps that prevent the stands from rattling.

HS-740A Hi-hat Stand
Built with quality and affordability in mind. It is manufactured to tolerate extreme situations and will easily withstand the rigors of even the most hard-hitting drummers. It features a medium-weight design, tension adjustability, and has rotating legs.

Yamaha Tour Custom 5-Piece Fusion Floor Drum Set Features:

• 22" x 17" bass drum
• 10" x 8" tom with mount
• 12" x 9" tom with mount
• 16" x 16" floor tom
• 14" x 6" wood snare
  
  7210 Chain Drive Bass Pedal:
• Single-chain drive
• Horizontal frame brace
• Beater angle adjustment
  
  SS-740A Snare Drum Stand:
• Medium weight
• Single-bracing
• Compact design
• Height-adjustable
  
  Two CS-755 Medium-weight Boom Cymbal Stands:
• Medium weight
• Single-braced
• Vertical tilter
• Hideaway 17" boom with memory lock
• Boom tilter clamp holds boom securely
• Tube caps prevent rattling
  
  HS-740A Hi-hat Stand:
• Medium-weight
• Chain linked
• Tension adjustable
• Rotating legs

Save BIG when you buy today!