Powerful, road-tough unit for medium-sized gigs.

The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

Behringer EP2000 EUROPOWER Power Amp Features:

• 2 x 1,000 Watts into 2 ohms; 2 x 750 Watts into 4 ohms; 2,000 Watts into 4 ohms (bridge mode)
• Precise Power, Signal and Clip LEDs to monitor performance
• XLR and 1/4" TRS input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
• Independent limiters per channel offer reliable protection against overload and distortion
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• Ultra-reliable Toshiba/Fairchild power transistors
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• Back-to-front ventilation system including air filter for reliable operation
• "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by Behringer Germany

Order now and get this robust power amp to go.

Behringer EP2000 EUROPOWER Power Amp Specifications:

• Output Power:
• 20Hz–20kHz @ 0.1% THD, both channels driven:
• 8Ω per channel-350W
• 4Ω per channel-500W
• 2Ω per channel-650W
  
  RMS @ 1% THD (sine wave), bridged mode:
• 8Ω-1000W
• 4Ω-1300W
  
  Peak Power, both channels driven:
• 8Ω per channel-400W
• 4Ω per channel-750W
• 2Ω per channel-1000W
  
  Peak Power, bridged mode:
• 8Ω-1500W
• 4Ω-2000W
  
  Distortion: <0.01%
  
  Frequency Response:
• At 10dB below rated output Power-20Hz–20kHz,
• At -3dB points-5Hz–50kHz
  
  Damping Factor: >300 at 8Ω
• Noise: -100dB unweighted, 20Hz–20kHz
• Voltage Gain: 40X (32dB)
• Input sensitivity: 1.15V (+3.4dBu) VRMS at 8Ω
• Input impedance: 10kOhm unbalanced, 20kOhm balanced
  
  Controls:
• Front: Power switch,gain control (channels 1 and 2)
• Rear: DIP switches (10x)
  
  Indicators:
• Power: Green LED
• Clip: Red LED, 1 per channel
• Signal: Yellow LED, 1 per channel
  
  Inputs: Balanced XLR and 1/4" TRS connectors
• Outputs: Touch-proof binding posts and professional speaker connectors
  
  Cooling: Continuously variable-speed fan, back-to-front airflow
• Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
• Load Protection: Turn on/off muting, AC coupling
• Circuit Type: Class AB complementary linear output
  
  Power Supply:
• Mains Voltage/Breaker: 100–120V~, 50/60Hz15A
• Power Consumption: 1600W
  
  Dimensions: 19" W x 3-1/2" H x 15-4/5" D
• Weight: 35lb.