Next-Generation virtual guitar amplifier with USB audio interface and energyXT2.5 recording software.

If a lack of money and floor space is all that's been standing between you and a home recording studio full of the finest vintage guitar amps and effects pedals, get ready to love the Behringer V-Amp 3 multi-effects processor. This red rocker comes loaded with 32 amp models, 15 speaker cabinet models and 16 classic effects. But that's only the beginning— you also get the UCA222 USB audio interface and free energyXT2.5 Compact recording software.

Turn Your Home Into a Hit Factory—In Seconds.
Hook the Behringer V-Amp 3 effects processor up to your computer using the included 1/4" TRS-to-RCA cable and UCA222 USB interface. Connect V-AMP 3 Phones output with the stereo line inputs of UCA222, and switch its direct monitoring function on. Then connect the UCA222 USB cable to your computer. You can monitor the signal with the UCA222's headphone jack. (This is also a great way to jam along with the MP3's on your computer). From there, the amazing energyXT2.5 DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. The energyXT2.5 software includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed by any controller keyboard, such as the UMA25S or UMX series, or programmed in step-write mode. To learn more about energyXT, or to download the demo, visit http://www.energy-xt.com.

energyXT2.5 Compact Recording Software - Behringer Edition
If you're ready to take your projects to the next level, XT Software's energyXT2.5 is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into CD or web-ready recordings. energyXT2.5 includes built-in synthesizers, which can be accessed directly via an external controller or programmed by step-write mode. There's even a built-in drum machine and internal multi-FX processor.

Any Classic You Like
The Behringer V-Amp 3's 32 amp models are organized into four groups: CLEAN, BLUES, METAL and ROCK. Just twist the dedicated dial to plug into unbelievably authentic simulations of the greatest British and American tube amps from the 1950s to today. You even get models of uncommon—yet renowned—boutique tube amps! When you select an amp model, a speaker cabinet model is automatically selected. But if you'd prefer a different model, just go to EDIT>CABINETS, then use the BANK UP/DOWN buttons to navigate through all 15 options.

Just like on an actual guitar amp, you've got a three-band EQ, GAIN, REVERB, VOLUME and MASTER VOLUME dials. By holding the TAP button, the TREBLE dial becomes a PRESENCE control. This enables the adjustment of a high-frequency filter that can add or remove a "shimmer" from the V-AMP 3's tone.

Top Tone—In Full Effect
The V-Amp 3 gives you flanger, chorus, compression, delay and 12 other beautiful digital effects to apply to your sound. Adjust the effect's level in the mix via the EFFECTS dial. To adjust effect parameters, you can rhythmically press the TAP button to alter delay times or LFO speeds, or hold down the TAP button and twist the EFFECTS knob to access e.g. feedback or depth. By using a MIDI pedal, such as the Behringer FCB1010, you can access an additional Wah Wah effect. You can adjust the filter characteristic by entering EDIT mode, selecting the DRIVE menu and turning the EFFECTS knob while holding the TAP button. Presenting the Presets
All of these elements have been combined into 125 different presets divided into 25 banks, accessible through the BANK UP/ BANK DOWN buttons. Within each bank, you can press buttons A through E to explore its different presets. You can also create and save your own presets. Start by selecting a preset, then making any changes you wish: amp, EQ, effect, etc. The preset LED will begin to flash, indicating that the V-AMP 3 is ready to save your settings. To do this, hold the preset button down for about two seconds. Once the LED stops flashing, you have saved the modified preset. On top of all this, the V-AMP 3 also features a built-in tuner and noise gate. In essence, it's a Swiss Army Knife for the home recording enthusiast or gigging guitarist who can't seem to settle on one amp. Stunning in the studio, the V-Amp 3 features several configurations that make it an invaluable asset in the studio. Access the configuration menu by pressing the B and D buttons at the same time. Then use BANK UP and BANK DOWN to select a configuration.

When using headphones, the V-Amp 3 will switch into Studio Mode 1 (S1). This stereo mode works well for both monitoring and recording with effects, amp and speaker modeling. It doesn't apply the additional three-band EQ to the signal, but most recording programs—like energyXT2.5— have their own EQ. In Studio Mode 2 (S2), the V-Amp 3 sends a signal with amp and speaker simulation, but only the right output has effects. You can either record both left and right outputs to separate tracks, or record the "dry" left output while monitoring the right output.

Stellar on Stage
The V-Amp 3 has three live configurations. When performing live with this device, you can either run it to an amp on stage, run directly to the mixing board, or both. Live Mode 1 is the best choice for running the outputs directly to the mixer, because it applies amp and speaker simulation, effects and an additional 3-band EQ.

Use Live Mode 2 to run the V-Amp 3 into the effects return inputs of 2 different guitar amps. This configuration does not feature speaker simulation, allowing the amplifier's natural speaker sound to go unaltered. In this scenario, the amps would be mic'd on stage to get the sound to the house speakers, and having a dedicated monitor would be less important. In Live Mode 3, you can send the left output to an amp's effects return for onstage volume, while the right output sends signal to the main mixer for inclusion in the main house mix. Also note that you can press the TAP key while turning the GAIN knob to adjust the input sensitivity to match the output of your guitar's pickups. If the CLIP LED lights, the input's sensitivity should be reduced.

Veni, MIDI, Vici
The V-Amp 3 effects processor comes fully equipped to fit right into a MIDI (Musical Instrument Digital Interface) setup. It can be controlled in real time from a computer, or via a MIDI foot controller during a live performance. Its MIDI connectors are international-standard 5-pin DIN connectors. You will need dedicated MIDI cables (not included).

The MIDI IN jack receives MIDI controller data. It can be adjusted in EDIT mode by pressing the A button and then using the arrow keys. MIDI OUT/THRU sends data to a computer. You can transmit both preset data and parameter changes. Some people even use the V-Amp 3 as a remote control for parameters of their DAW or VST instruments, which is more handy than using the mouse alone. If set to MIDI THRU, the Behringer V-Amp 3 does not send its own MIDI information, but passes on the signal received at the MIDI IN connector.

So Much Sound, So Little Hassle
It's hard enough finding another virtual guitar amplifier with this much versatility, let alone one as economical as the V-Amp 3. This go-anywhere, do-anything wonder will leave you reeling in your own creativity, with cash to spare for other gear you'll need along the way to becoming a sonic titan both live and in your home studio.

Behringer V-Amp 3 Guitar Multi Effect Processor Features:

• 4 all-new plus 28 improved amp models multiplied by 15 speaker cabinet simulations give you a total of 480 virtual combos
• USB audio interface included, featuring stereo I/O, optical S/PDIF out, direct monitoring and separate control for phones out
• No-latency guitar recording on your PC—edit and monitor your sound directly on V-AMP 3 and record to the incredible multi-platform music production software energyXT2.5 Compact BEHRINGER Edition
• Studio quality multi-effects including reverb, chorus, flanger, phaser, rotary, auto-wah, echo, delay, compressor and various effects combinations
• 125 memory locations pre-arranged for many popular styles and embedded in the acclaimed intuitive V-AMP user interface
• Tap-tempo function and many other parameters directly accessible on the unit
• Presence control adjusts a high-frequency filter, simulating the negative feedback of tube amps
• Preamp bypass function allows use as a stereo effects processor without amp modeling
• Stereo Aux input lets you play along to a cue from your PC, CD, MP3 or drum computer for practice, teaching and home-recording applications
• Balanced stereo Line output can be configured for many recording and live applications
• Adjustable auto-chromatic tuner plus effective global configurations and equalization easily adopts the V-AMP 3 to any situation outside your home studio
• MIDI implementation includes program changes, control changes and SysEx, allowing complete MIDI remote control or automation with your energyXT2.5 or any other DAW
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by Behringer Germany

The V-Amp 3 guitar effect processor gives you the power to start recording a molten magnum opus in no time!

Behringer V-Amp 3 Guitar Multi Effect Processor Specifications:

• Instrument input: 1/4" TS connector, unbalanced
• Input impedance: 1 mOhms
• Max input level: +9 dBu
• Aux in stereo: 1/4" TRS connector
• Input impedance: 15 kOhms
• Analog line outputs L/R: 1/4" TS connector, balanced
• Output impedance: 2.2 kOhms
• Max output level: +20 dBu
• Headphones connector: 1/4" TRS connector, unbalanced
• Max. input level: +15 dBu/100 Ohms (+23 dBm)
• Midi type: 5-pin DIN connector in, out, thru
• Digital Signal processing
• Converter: 24-bit delta-sigma, 64/128 x oversampling
• Dynamics A/D: 104 dB @ preamp bypass
• Dynamics D/A 92 dB
• Sample rate: 31.250 kHz
• DSP: 100 Mips
• Delay time: max. 1,933 msecs.
• Latency (Line in to Line out): approx. 5 msecs.
• Display type: 2-digit 7 segment LED display
• Mains voltage: 120V~, 60 h=Hz
• Power consumption: 13W
• Mains connection: external power supply unit
• Dimensions: 3.1"H x 10.5"W x 7"D
• Weight: 1.6 lb.