Developed specifically to produce the most natural sound of resophonic guitars.
The Jerry Douglas Signature Aura Pedal features 16 custom Fishman Aura Images created and used by Jerry
Douglas specifically for resophonic guitars. The effect pedal features 24 bit A/D/A; 32 bit internal processing, volume, blend,
and image select controls, a feedback-fighting phase switch, bypass/mute foot switch, and input trim with clip/low battery
indicator. Runs on 9V battery or Fishman 910R or suitable power adapter (not included).
Larry Fishman developed this
Signature Series Aura Pedal with a world-class team of professionals, including musician Jerry Douglas, recording studio engineer
Bil VornDick, and renowned resonator builder Paul Beard, to bring you the most realistic amplified tone available. Night after
night, or any time you record, this Fishman Aura pedal lets you reproduce the tone that can only be created by such trade
masters.
Fishman Jerry Douglas Signature Aura Imaging Effects Pedal for Resonator Guitar Features:
- 16 custom Fishman Aura Images created and used by Jerry Douglas specifically for resonator guitars
- Volume, Blend, and Image Select controls
- Feedback-fighting Phase switch
- Bypass/Mute foot switch
- Input Trim with Clip/Low Battery indicator
- Runs on 9V battery or Fishman 910R or suitable power adapter (not included)
- 24 bit A/D/A; 32 bit internal processing
Save BIG when you buy today!
Fishman Jerry Douglas Signature Aura Imaging Effects Pedal for Resonator Guitar
Specifications:
- Digital signal path: A/D, D/A conversion: 24-bit
- Signal processing: 32-bit
- Power supply: 9V alkaline battery or 9VDC adapter
- Typical in-use current consumption: 18mA
- Typical 9V alkaline battery life: 27 hours
- 9V adapter: Fishman 910-R (for 110V) or suitable fi ltered and regulated,
- 200mA type, tip = negative
- Input impedance: 10M Ohm
- Nominal output impedance: 3.5k Ohm
- Input trim gain range: -10dB to +2dB
- Maximum output level (onset of clipping): +2.4dBV
- Baseline noise: -92dBV (A-weighted)
- Dynamic range: 94dB (A-weighted)
- Phase switch: Left position = non-inverting
- Dimensions: 5.6"L x 4"W x 2.1"H
