An instrument cable that reduces both signal noise and single-coil pickup noise.

The Pro Co Lifeline Line Instrument Cable is constructed based on transmission line theory. In a nutshell, using a 4-conductor microphone cable to replace a single-conductor guitar cable, Pro Co solders the cable's 2 red conductors (red and red with white stripe) to the tip on either plug, and then solders the cable's 2 black conductors (black and black with white stripe) to the ground on either plug.

Pro Co then solders the shield to the ground on the amplifier end and lifts the ground (do not solder) on the instrument end. This helps to shunt most of the noise that jumps on the shield to chassis ground before it becomes part of the signal path.

The Pro CO Lifelines cable defends the world from guitar players with noisy single-coil pickups and helps quiet them—the pickups; not the guitar players—down to a usable commodity before the drummer shoots the guitar player.

The white end of the Pro Co instrument cable goes into your guitar and the black end of the cable goes into your amplifier.

Keep it quiet with a Lifelines cable.

Pro Co Lifelines Line Instrument Cable Specifications:

• Model: LLC - (length)
• Connector A and B: G&H Industries 1/4" phone plug (6.35mm)
• Wire: 424BXXK, .295" O.D., 96% braid shield
• Speaker gauge: 24 AWG
• Assembly method: solder
• Made in the USA