A big, green, ferocious pedal that will transform the sound of your bass!
The Fender Sub-Lime Bass fuzz pedal gives you classic Fender fuzz tones ranging from the barest touch
of evil to an utterly seismic roar. Best of all, you can tailor your tone by setting the crossover frequency wherever you
want the fuzz to happen—low-frequency fuzz, high-frequency fuzz and anything in between, all without sacrificing all-important
low-end muscle and fundamental bass tone.
Dressed in sublime lime green, the big, heavy-duty cast design evokes Fender's
great old pedals of the '70s and boasts an enormous control dial that fluoresces entrancingly from green to red as you adjust
the fuzz level from left (slightest hint) to right (DEFCON 1).
Simple volume and drive controls let you easily dial
in the loudness and range of fuzz tones. Runs on 9-volt battery or DC power.
Controls
•Rate: This knob controls the rate at which the phase shifting occurs. The rate control knob alternately illuminates
blue and red at the same rate as the phase shifting.
•Intensity: This knob adjusts the intensity of the Phasing effect.
•Frequency: This knob adjusts what frequencies are affected by the phasing action. Fully counter-clockwise causes the
bass frequencies to be affected most by the phasing action, fully clockwise causes the treble frequencies to be most affected
by the phasing action.
•Bypass Switch-A: True-bypass of the phaser effect. Turns the phasing effect on/off.
•Output Jack: Connect to the input of your amplifier (or other audio device).
•Input Jack: Plug your guitar (or other audio source) in here. Un-plug the input plug from this jack to turn off the
device and save power when not in use.
•DC Input Jack: Plug in a AC/9V DC adapter into this jack to eliminate the need for batteries.
Fender Sublime Bass Fuzz Pedal Features:
- Re-creates classic Fender fuzz tones
- Simple volume and drive controls
- Control dial fluoresces from green to red as you adjust the fuzz level
- Lime green color
- Heavy-duty cast design
- Runs on 9-volt battery or DC power
To capture all the classic Fender fuzz bass tones...Order now!
Fender Sublime Bass Fuzz Pedal Specifications:
- Input Impedance: 470kOhm
- Nominal Input Level: -20dBV
- Output Impedance: 4.7kOhm
- Nominal Output Level: -20dBV
- Recommended Load Impedance: 50kOhm or Greater
- Power Requirements: 9VDC (Center Pin = Negative); 40mA Minimum
