An instrument cable that minimiuzes both signal noise and single-coil pickup noise.

This Pro Co Instrument Cable's construction is based on transmission line theory. In a nutshell, using a 4-conductor microphone cable to replace a single-conductor guitar cable, Pro Co solders the cable's two red conductors (red and red with white stripe) to the tip on either plug, and then solders the cable's two black conductors (black and black with white stripe) to the ground on either plug. Pro Co then solders the shield to the ground on the amplifier end and lifts the ground (do not solder) on the instrument end. This helps to shunt most of the noise that jumps on the shield to chassis ground before it becomes part of the signal path. This defends the world from guitar players with noisy single-coil pickups and helps quiet them (the pickups; not the guitar players) down to a usable commodity before the drummer shoots the guitar player. The white, right angle end of the audio cable goes into the guitar and the black, straight end of the cable goes into the amplifier.

Quality cable you can depend on to last. Buy a Pro Co Lifelines Line Instrument Cable.

Pro Co Instrument Cable with Right Angle/Straight Plugs Specifications:

• Model: LLCL - (length)
• Connector A: G&H Industries straight 1/4" phone plug (6.35mm)
• Connector B: G&H Industries male right angle 1/4" phone plug (6.35mm)
• Wire: 424BXXK, .295" O.D., 96% braid shield
• Speaker gauge: 24 AWG
• Assembly method: solder
• Made in the USA