16-channel personal monitor mixer for the one one or two-person studio.
The Aviom Starter System includes the Aviom A-16II Personal Mixer, Aviom AN-16/i 16-Channel Input Module,
and the Aviom MT-1 Mic Stand Mount - the essential equipment to get your home recording studio up and running.
A-16II
Personal Mixer
The Aviom A-16II Personal Mixer allows individual performers to create custom monitor mixes tailored to their individual needs.
Designed for use in live performance or in the studio, the A-16II Personal Mixer is a 16-channel digital mixer which gives
each performer completely independent control over channel volume, grouping, pan, and stereo spread, as well as master volume
and tone. Every performer gets a completely customized monitor or cue mix. Each user can save and recall up to sixteen custom
mixes as presets in their Personal Mixer.
The stereo output from the A-16II can be used to drive virtually any output
device-from wired or wireless in-ears or headphones to powered floor wedges, an amplifier, or spot monitors.
Audio
is taken from an existing console, using a combination of up to 16 direct outs, inserts, auxes, or groups. These sixteen channels
are fed to a Pro16 Input Module, such as the AN-16/i, and are then distributed digitally to an unlimited number of Personal
Mixers using Cat-5e cables. Set-up is simple and quick.
Personal Mixers can be daisy-chained or connected in parallel
using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable (included).
The A-16II can be mounted on a standard mic stand or music stand.
AN-16/i 16-Channel Input Module
The Aviom AN-16/i converts 16 balanced line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio
transmitted via A-Net. Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor
Mixing System. Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input
path for main return signals from front-of-house.
The AN-16/i provides 16 balanced line-level inputs into a Pro16 system.
Audio is converted to digital (48kHz, 24 bits, no compression) and transmitted in real time via A-Net, up to 500 feet over
a Cat-5e cable. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted
into an existing audio signal path.
In most uses, audio from a console-any combination of channel inserts, direct outs,
submixes, auxes, or groups-is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to
the A-Net In of a Pro16 Personal Mixer (such as the A-16II) or an A-Net Distributor.
The built-in A-Net Expansion jack
allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can
be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations up to 32x32,
48x16, or 64x0.
MT-1 Mic Stand Mount
The Aviom MT-1 allows the Aviom A-16II Personal mixer or A-16CS Control Surface to be mounted on a standard microphone stand.
The MT-1 attaches with three screws to the bottom of an A-16II or A-16CS and mounts on any standard mic stand.
Aviom Single Starter System Features:
- A-16II Personal Mixer
- 16-channel stereo mixer
- Fully adjustable pan per channel
- Line/Headphone audio output
- Auto-detect mono/stereo circuitry
- Simple set-up with Cat-5e cables
- Sixteen Preset locations for storing custom mixes
- Channels can be soloed, muted, or grouped
- Global trim for reducing all channel volumes
- Sixteen channel select buttons with dual LEDs
- Pan/Spread control with LED readout
- Channel volume control with LED level readout
- Master Volume, Treble, and Bass controls
- Includes one Aviom L-30 30' Cat-5e cable
- Mounts easily on a mic stand with the MT-1 mic stand mount
AN-16/i 16-Channel Input Module
- Sixteen balanced audio inputs (TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net Out and A-Net Expansion digital audio network connections (Cat-5)
- Stereo Link switches for each channel pair
MT-1 Mic Stand Mount
- Attaches to any standard mic stand
- Threaded thumb screws included
Recording away from the computer? Don't keep running back and forth to adjust your cue mix
between takes and songs. Start your studio the right way with personal monitoring system from the company that invented it!
Aviom Single Starter System Specifications:
- A-16II Personal Mixer
- A-Net Input/ Output: 1 input, 1 output Category 5 (RJ45 connector)
- Digital to Analog Conversion Bit Depth: 24 bit
- Signal to Noise Ratio (Referenced to 0dB): -103dB
- Treble: +/-12dB at 9kHz shelving
- Bass: +/-12dB at 160Hz shelving
- Maximum Levels (RMS): Line/Headphone outs: 1.0 watt at 100 ohms
- Line/Headphone outs: 140 ohms
- Dimensions: 10.75" wide x 5.6" deep 2.25" high
- Weight: 3.4 lbs.
AN-16/i 16-Channel Input Module
- Analog to Digital Conversion: 48kHz sample rate, 24 bit
- Frequency Response: 4Hz-22kHz
- A-Net Output: one Category 5 (RJ45 connector)
- A-Net Expansion: one Category 5 (RJ45 connector)
- Gain Switch: Four Position, -10dBv, 0dBu, +4dBu and +22dBu
- Channel LED Indicators: Signal Present and Clip, per channel
- Line Input Impedance: 48k ohms
- Power: 18-24 VDC, 500mA
- Dimensions: 19" wide x 6.7" deep x 1.75" high (1U)
- Weight: 6.8 lbs.
MT-1 Mic Stand Mount
- Boxed Weight: 1lb.
- Boxed Dimensions: 7"w x 5"d x 3"h
