A convenient UHF wireless mic system for guitarists with 16 selectable channels and a 300' range.

The Galaxy Audio PSE/52HS Wireless Microphone System features a PSER UHF diversity receiver and a Guitar Bud Mini Transmitter. If you're a guitarist who likes to move around the stage and don't want to worry about tripping over wires or wearing a bulky bodypack, the Guitar Bud Mini Transmitter is your ideal wireless mic solution. It's a fixed frequency guitar bud with an adjustable 1/4" plug, adjustable gain, an on/off switch, and a low batter indicator. It has a 135° angle of adjustment so it can work with most guitar body styles. The PSER receiver offers 16 selectable channels, volume control, and channel display.

Galaxy PSE/GBD Mini Guitar Bud Wireless System Features:

• 300' range
• UHF frequency
• Diversity antennas
• Single rack mount included
• 16 selectable channels
  
  PSER Wireless Reciever
• Output volume control
• AF level indicator
• IR sync
• Squelch adjustment
• XLR/1/4" outputs
  
  Guitar Bud Mini Transmitter
• Fixed frequency
• Gain control
• Operation time: about 7 hours
• Works with most guitar body styles
• On/Off/mute switch
• Gain adjustment
• 5 mW output
• 135° angle of adjustment
• Runs on 1 'AAA' battery

Order this wireless system today and you'll be able to play guitar with no worries about wires.

Galaxy PSE/GBD Mini Guitar Bud Wireless System Specifications:

• System
• Frequency Range: 655-679MHz
• Transmitter Output Level: 10dBm
• Band: UHF
• Operating Range: Under Typical Conditions 300' (92m)
• Note: Actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response: +/-3dB 70Hz-16KHz
• Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1%
• Dynamic Range: >90dB A-weighted
• Operating Temperature: Range 14°F to 122°F (-10 C° to +50 C°)
• Note: battery characteristics may limit this range
  
  PSER
• Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 Ohms load) -12dBV 1/4" connector (into 3KOhms load) -18dBV
• Output Impedance: XLR connector 200Ohms " connector 1KOhms
• XLR output: Impedance balanced
• Pin1: Ground (cable shield)
• Pin2: Audio
• Pin3: No Audio
• Sensitivity: -93dBm for 30dB
• Image Rejection: >90dB
• Dimensions (HxWxD): 1.7" x 8.3" x 6.3", (44mm x 212mm x 160mm)
• Weight: 31oz (880g)
• Power Requirements: 12-18 V DC at 400mA, supplied by external power supply