|
|
|
|
|
The amazingly affordable 401X Quad offers high-end RF and audio, full-featured operation, and rackmount
convenience.
With three handheld microphones and a headset, this wireless kit makes full use of the four independent
VHF channel's on Nady's 401x Quad. The receiver is a convenient, rugged, all-metal housing taking only a single rack space.
120db dynamic range results in excellent audio quality with up to 250 feet of coverage with optimal line-of-sight.
Nady 401X Quad 3 Handheld Channels and 1 Headset Channel Features:
- Four independent VHF receivers in one convenient, rugged, all-metal single rack space housing—makes operating 4
wireless systems at the same time easier than ever
- Front dual antenna jacks for either onboard or remote antennas
- Front panel Power On/Off switch, plus Power On LED, TX ON and AF signal level LED displays
- Noise-free transmitter ON/OFF operation
- Rear panel individual XLR Output jacks, volume and RF mute controls for each of the 4 channels, and 4-Channels-Mixed AF
Out 1/4" phone jack
- High performance—transparent audio with 120 dB dynamic range and up to 250+ feet optimum line-of-sight operation
- 3 x WHT handheld microphone transmitter, 1 x WLT/WGT headworn microphone bodypack transmitter: can be operated simultaneously
on the 4 different channels
WHT—Handheld Microphone Transmitter:
- Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum turret sound, maximum feedback, rejection
and minimal handling noise
- Off/Standby/On switch allows convenient audio muting with the transmitter "On"
- Low battery LED indicator flashes once for unit "On"; lights steady for low battery alert
-
- WLT/WGT—Bodypack Transmitter:
- Headworn/lavalier microphone bodypack transmitter
- Off/Standby/O switch allows convenient audio muting with the transmitter"ON"
- Low battery LED indicator flashes once for unit "On"; lights steady for low battery alert
- Locking 3.5mm mini-jack provides secure connection for removable microphone instrument cable
- Easily accessible input level adjust control for optimum sound
- Comes with HM-3 Headmic unidirectional headworn microphone
Your lead vocalist and three backup singers can go wireless in one easy and affordable solution.
Order today!
Nady 401X Quad 3 Handheld Channels and 1 Headset Channel Specifications:
- Frequency Response 30-18KHz (-3dB)
- Dynamic Range 120dB (20-20KHz)
- Total Harmonic Distortion <0.5% (typical)
- RF Carrier Frequency Range 170-230MHz (Factory installed Channels)
- Frequency Stability +/- 0.005%, crystal controlled
- Modulation FM (F3E), +/-15KHz nor,+/-30KHz max
- Operating Range 250 feet typcial —up to 500+ feet optimum line-of-sight
Frequency Group 1
- Channel A = 171.905 MHz
- Channel B = 185.15 MHz
- Channel D = 209.150 MHz
- Channel N = 197.150 MHz
Frequency Group 2
- Channel E4 = 173.8 MHz
- Channel H = 191.3 MHz
- Channel F = 203.4 MHz
- Channel E = 215.2 MHz
|
|
|
|
|
|
|