16-channel UHF PLL wireless in-ear stereo monitoring system designed for focused audio.

The wireless Nady's PEM-500 in-ear monitor system offers all the advantages of wireless in-ear monitoring—mobility, more focused audio, freedom from feedback, and elimination of transport issues associated with conventional floor monitors—as well as the long-term health benefits of safe listening levels. The wireless system includes the PEM-500R bodypack receiver and a PEM-500T half-rack transmitter, as well as a pair of lightweight, miniature in-ear speakers.

For the first time, a wireless in-ear monitor system combines state-of-the-art advanced frequency-agile PLL synthesized UHF technology high-end performance, ease of use, and unprecedented affordability. The Nady PEM-500 wireless system offers a choice of 16 user-selectable UHF channels in both the transmitter and receiver(s) as well as stereo (MPX system) or mono mode transmission. This system is indispensable for live-stage music performance, and is loaded with features previously found only in wireless systems costing several times more.

Nady PEM-500 Wireless System (564 - 574.3MHz) Features:

• Available in the 564-574.3MHz UHF frequency band for interference-free, long-range performance (up to eight systems can be operated simultaneously, depending on location and frequency band)
• System consists of PEM-500T stereo transmitter and one bodypack stereo PEM-R receiver (both offer 16-channel user selectability)
• Any number of additional receivers can be operated with the same transmitter if all are set to the same channel
• Proprietary companding circuitry for wide dynamic range and clear, natural sound
• Operating range: up to 300 ft. typical (depending on site conditions)
• Rugged, foam-padded traveling case provides easy, safe transport and storage
  
  PEM-R Bodypack Wireless Receiver:
• Portable bodypack receiver features a power switch; switchable built-in volume limiter; Output Level control; stereo/mono select switch; two-color (red/green) 3-way Unit On/Signal/low-battery LED indicators
• Operates up to six hours (depending on volume) on a single 9V alkaline battery
• Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear Koss stereophones with soft rubber foam mounts in three shapes (conical, cylindrical, and hexagonal); designed for fitted comfort and optimum acoustic transfer and isolation
• Rear clip can be rotated 90° for attaching receiver either vertically or horizontally to clothing
  
  PEM-500T Stereo Transmitter:
• Rugged, all-metal half-rack can be rackmounted with single rackmount kit (included), or side-by-side with optional dual rackmount kit
• Microphone Input allows wireless cueing of performers on stage
• Front panel features Input Level control; stereo headphone monitor output jack and volume control; Select button for choosing one of 16 UHF channels, LED channel display; L/R 10-segment Audio Input Level displays
• Back panel provides BNC jack for the detachable antenna; stereo/mono select switch, 1/4" TRS balanced microphone input, XLR jacks for left and right line inputs
• Externally powered by AC/DC power adapter

Nady PEM-500 Wireless System (564 - 574.3MHz) Includes:

• padded traveling case

Keep an ear on your sound without risking tinnitus. Order today!

Nady PEM-500 Wireless System (564 - 574.3MHz) Specifications:

• Overall Wireless System
• Operating frequency range modulation: 564.000 - 574.3MHz
• Modulation: Mono or stereo (MPX with pilot tone), FM: F3E ±60KHz, nominal
• Audio frequency response: 50~12,000Hz
• T.H.D.: <1%
• Signal-to-Noise Ratio: >80dB, with propietary companding noise reduction
• Operating Range: Up to 300 feet typical (depending on site conditions)
  
  PEM-500T Wireless Transmitter
• RF output power: Max. 50mW (country dependent)
• L/R audio line inputs:
• Input impedence: 600Ω
• Nominal input level: 0dBm
• Max. input level: +6 dBm
• Headphones out power: 100 mW max. @32Ω, 190mW @ 16Ω
• Spurious Emission: > -55dBc
• Frequency stability: ±:100PPM
• Controls: Power On/Off, Stereo/Mono, and channel select switches; input level, headphones monitor volume controls
• Connectors: 1/4" stereo headphones monitor out, 1/4" TRS balanced mic input, balanced XLR & R line input, and 2.1mm barrel-type DC input jacks; BNC antenna socket
• Indicators: Power ON LED; channel and 10-segment L/R audio input LED displays
• Antenna: 1/4 wave rigid detachable, BNC mount
• Power requirement: 14V, 500mA, AC adapter supplied, (UL/CSA approved 120VAC or CE approved 230VAC)
• Dimensions: 8.27"D x 9.13"W 1.73"H (210mm x 232mm x 44mm)
• Weight: 2.98lb. (1.35kg)
  
  PEM-500R Wireless Receiver
• Maximum audio output level: 20mW
• Minimum audio output load impedance: 16Ω
• RF sensitivity: 2.5uV (-100dB/12dB SINAD)
• Squelch threshold: < -90dB
• Spurious rejection: >55dBc
• Audio output connector: 3.5mm Stereo (Tip=left, Ring=Right, Sleeve=ground)
• Controls: Volume adjust, limiter ON/Off, power ON/OFF, Stereo/Mono select switches; 16-channel selector switch
• Indicators: Two-color (red/green) 3-way unit, ON/Signal/Low Battery LED
• Power requirements: 9V alkaline battery
• Current drain: < 40 mA
• Battery life: Up to 6 hours, volume dependent
• Antenna: Internal
• Dimensions: 4.2"H x 0.9"D x 2.6"W (106mm x 23mm x 66mm)
• Weight: 2.85oz. (80kg)