Warm, rich vocal reproduction combined with smart, hardworking wireless.

This Shure SLX Wireless Microphone System includes an SLX4 Diversity Receiver, and an SLX2/SM86 Wireless Handheld Microphone. The Shure system offers wireless freedom combined with smooth sound tailored for warm, rich vocal reproduction.

Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. Shure's rugged SLX Wireless Systems exceed these demands with innovative automatic setup features, such as auto frequency scan and transmitter setup, and exceptional wireless clarity. Supporting 20 compatible systems across multiple UHF frequency bands, SLX smoothly integrates into houses of worship, lecture halls, conference rooms, and mobile gear cases. SLX Wireless Systems feature Shures patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless.

SLX4 Wireless Receiver
The Shure SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

SLX2/SM86 Wireless Microphone
The Shure Wireless Microphone consists of the SLX handheld transmitter fitted with the SM86 cardioid microphone capsule. The SLX2 transmitter includes timed backlit LCD display, frequency and power lockout, and "Mute" functionality. The SLX2 transmitter design allows for interchangeable microphone cartridges. The SM86 is a rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in three-point shock mount and two-stage pop filter.

Shure SLX24/SM86 Wireless Microphone System Features:

• SLX4 Wireless Receiver:
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
  
  SM86 Cardioid Microphone
• Cardioid, Condenser
• Frequency response: 50 to 18,000 Hz
• Rugged construction withstands the rigors of touring sound
  
  SLX2 Handheld Transmitter
• Frequency response: 50 to 15,000 Hz
• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 518 - 782 MHz operating range

Order today for legendary Shure quality.

Shure SLX24/SM86 Wireless Microphone System Specifications:

• SLX4 Wireless Receiver:
• Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
• Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
• XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
• Sensitivity: —105 dBm for 12 dB SINAD, typical
• Image Rejection: >70 dB, typical
• Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
• Operating Range Under Typical Conditions: 300 ft. (100m)
• Note: Actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
• Note: Overall system frequency depends on microphone element.
• Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
• Dynamic Range: >100 dB A-weighted
• Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
• Note: battery characteristics may limit this range
• Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
• Weight: 1 lb. 13 oz. (816 g )
• Housing: Galvanized steel
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
• respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
• Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
  
  SLX2/SM86 Wireless Microphone
• Audio Input Level: +2 dBV maximum at -10dB position; -8 dBV maximum at 0dB position
• Gain Adjustment Range: 10dB
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions (Length x Diameter): 10 x 2 in. (254 x 51 mm)
• Weight: 10.2 oz. (290 grams) without batteries
• Housing: Molded PC/ABS handle and battery cup
• Power Requirements: 2 "AA" size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)